Question

Two large tanks with the same levels of water inside, one is open to the atmosphere...

Two large tanks with the same levels of water inside, one is open to the atmosphere while the other is closed and pressurized with an inside pressure of 65 k Pa gage . Water is to be pumped to the pressurized tank by a pump with 85% efficiency, placed in a stainless steel pipe connecting the two tanks at the lowest level. The pipe is 9cm in diameter, 100 m long and the volume flow rate is 0.025 m3/s

  • find the power of the pump
Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Hot water in an open storage tank at 82.2°C is being pumped at a rate of...
Hot water in an open storage tank at 82.2°C is being pumped at a rate of 0.379 m3/min from the tank. The line from the storage tank to the pump suction is 6.1 m of 2-in schedule 40 steel pipe and it contains two elbows. The water discharge line after the pump is 61 m of 2-in pipe and contains two elbows. The water discharges to the atmosphere at a height of 6.1 m above the water level in the...
A large storage tank, open to the atmosphere at the top and filled with water, develops...
A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole in its side at a point 14.0 m below the water level. If the rate of flow from the leak is 2.20 ✕ 10−3 m3/min, determine the following. (a) Determine the speed at which the water leaves the hole. m/s (b) Determine the diameter of the hole. mm
Water (at 25o C) from a lake is desired to be pumped over a 100 m...
Water (at 25o C) from a lake is desired to be pumped over a 100 m high hill to a pool of a house. A 300 m pipeline has three 45o elbows, two 90o elbows, two gate valves (one wide open and one half open). The dimensions of the pool are 8x6x2 m3 . The readily installed pump whose efficiency is 70% requires 6.4 kW power to fill the pool in 6 hours. The suction line is 5 m long...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT