Question

A belt drive system with a type A belt of length 35in is delivered 6hp and...

A belt drive system with a type A belt of length 35in is delivered 6hp and linearly moves at 2000ft/min. How many belts are required if the minimum sheave diameter is 3in and the angle correction factor is 1.

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

Thank you....

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A belt drive system is used as a speed reducer. The input shaft rotates at 1500...
A belt drive system is used as a speed reducer. The input shaft rotates at 1500 rpm and has 30 tooth sprocket, with a pitch diameter of 4.1 inch. The output shaft has a 60 tooth sprocket with a pitch diameter of 8.2 inch. The center distance between two shafts is 13.2 inches Determine following for the belt drive: Velocity ratio Anglular velocity of the output shaft Linear belt speed Belt wrap on the input and output sprockets Belt perimeter...
Question 4 An open belt drive consists of two pulleys which are 5 meters apart. The...
Question 4 An open belt drive consists of two pulleys which are 5 meters apart. The diameter of larger pulley and smaller pulley are 2 m and 1 m respectively. The allowable maximum tension of the belt is 4 kN. The coefficient of friction between the belt and pulley is 0.4 and the mass of the belt is 2 kg/m length. Calculate: 4.1 the torque on the shafts when the lager pulley rotates at 300 rev/min. (7) 4.2 the power...
A 10kW electric motor, which is running at 43 rev/s, is used to drive a crusher...
A 10kW electric motor, which is running at 43 rev/s, is used to drive a crusher which operates 24 hours per day. An engineer has specified 212 mm and 315 mm pitch diameters for small pulley and large pulley respectively; and C 3454 V-belt type. a) What should be the conservative service factor for this belt and pulley system? b) Calculate the center distance between the pulleys? c) Calculate allowable power, design power and required number of belts. (Take design...
A 50-inch long belt is used to transmit power from a motor to a working shaft....
A 50-inch long belt is used to transmit power from a motor to a working shaft. The two sheaves involved are both the same size, hence the belt is not being used to reduce or increase speed or torque, but simply to “couple” two shafts. The motor’s rated power is 50 hp and the required service factor is 1.25. The motor speed is 1160 rpm and the sheave diameters are 7.9”. How many 5V belts are required here? What is...
A stepper motor drives a precision mechanism through a toothed belt and pulley system. Friction in...
A stepper motor drives a precision mechanism through a toothed belt and pulley system. Friction in the system requires a constant force of 205N. The pulley has a diameter of 130mm. A force of 310N is required to accelerate the machine drive uniformly up to a velocity of 0.2m/s in 0.5 seconds. This velocity is held constant for 3 seconds before the motor decelerates to rest in 1.5 s. The stepper motor operates with 400 pulses/rev and is coupled to...
A stepper motor drives a precision mechanism through a toothed belt and pulley system. Friction in...
A stepper motor drives a precision mechanism through a toothed belt and pulley system. Friction in the system requires a constant force of 205N. The pulley has a diameter of 130mm. A force of 310N is required to accelerate the machine drive uniformly up to a velocity of 0.2m/s in 0.5 seconds. This velocity is held constant for 3 seconds before the motor decelerates to rest in 1.5 s. The stepper motor operates with 400 pulses/rev and is coupled to...
The drive shaft AB of an automobile with 1.7 m long is made of a steel...
The drive shaft AB of an automobile with 1.7 m long is made of a steel having an allowable shear stress τall = 60 MPa and modulus of rigidity G = 80 GPa. Limit angle of twist of the shaft is 0.035 rad. If the outer diameter of the shaft is 65 mm and the engine delivers 180 kW to the shaft when it is turning at 1170 rev/min, determine the minimum required thickness of the shaft’s wall.
Question 1 (25pts): On April 10th you delivered a batch of 100 steel sheets to II,...
Question 1 (25pts): On April 10th you delivered a batch of 100 steel sheets to II, as required by the contract. On April 11th the COR notifies you that he is rejecting 25 of the tendered sheets of steel. The COR provided the following documentation along with his rejection: The contract states that the rivet diameter to be used by II is 1/8 inch. A review of MIL-STD 40007 shows that a 1/8 inch rivet diameter requires that the rivet...
For a three-tank system that has a Fanning friction factor that depends on velocity, numerical simulations...
For a three-tank system that has a Fanning friction factor that depends on velocity, numerical simulations will be required. If the Blasius equation is used as a model for the Fanning friction factor, write out the system of differential equations and describe how they would be solved numerically. ****Three tanks are interconnected by pipes leading from the bottom of each tank to the other two tanks. Two of the tanks are identical and have the diameter of 11". The diameter...
A customer wishes to create a single-plane low-frequency satellite communications system in which the satellite footprints...
A customer wishes to create a single-plane low-frequency satellite communications system in which the satellite footprints just meet at the surface of the Earth. At the selected frequency, the satellites must operate an elevation angle of at least 10 degrees. a) Calculate how many satellites are required to meet this requirement if the selected orbit is at an altitude of 800 km. b) The customer has a better idea with the satellites operating at the same altitude but the minimum...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT