Question

a compressor operates at steady state. air enters the compressor with a mass flow rate of...

a compressor operates at steady state. air enters the compressor with a mass flow rate of 28800 kg/h at .99 bar and 27C and exits at 7.5 bar. the compressor operates adiabatically and the effects of motion and gravity can be ignored. the compressor isentropic efficiency is 70%. for exergy analysis the reference state is To=27C Po=.99 bar. use ideal gas model for air (MW=28.97 kg/kmol)

a. determine required power for compressor in kW
b. determine rate of exergy destruction
c. determine the exergetic efficiency

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An adiabatic compressor operates on air in a steady state process. The air enters the compressor...
An adiabatic compressor operates on air in a steady state process. The air enters the compressor at 25 oC and 150 kPa and exits at 250 oC and 500 kPa. Assuming constant specific heats for air at 300K, calculate the isentropic efficiency for this compressor.
Air at 1 bar, 295 K, and a mass flow rate of 0.7 kg/s enters a...
Air at 1 bar, 295 K, and a mass flow rate of 0.7 kg/s enters a compressor operating at steady state and exits at 3 bar. During the compressing from inlet to exit, the air experiences a polytropic process as PV^n=constant. m=6, n=1.48. (1) Determine the power required by the compressor. (2) Determine the heat transfer between the compressor and the surrounding. (s) Determine the rate of exergy destruction. Kinetic and potential energy effects are negligible. Let T_0 = 300...
Air at 1 bar, 295 K, and a mass flow rate of 0.7 kg/s enters a...
Air at 1 bar, 295 K, and a mass flow rate of 0.7 kg/s enters a compressor operating at steady state and exits at 3 bar. During the compressing from inlet to exit, the air experiences a polytropic process as PV^n=constant. m=6, n=1.48 (1) Determine the power required by the compressor. (2) Determine the heat transfer between the compressor and the surrounding. (s) Determine the rate of exergy destruction. Kinetic and potential energy effects are negligible. Let T_0 = 300...
Air enters the compressor of an air-standard Brayton cycle with a volumetric flow rate of 60...
Air enters the compressor of an air-standard Brayton cycle with a volumetric flow rate of 60 m3/s at 0.8 bar, 280 K. The compressor pressure ratio is 17.5, and the maximum cycle temperature is 1950 K. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. Determine: (a) the net power developed, in kW. (b) the rate of heat addition in the combustor, in kW. (c) the percent thermal efficiency of the cycle.
Saturated water vapor at 300°F enters a compressor operating at steady state with a mass flow...
Saturated water vapor at 300°F enters a compressor operating at steady state with a mass flow rate of 5 lb/s and is compressed adiabatically to 550 lbf/in.2 If the power input is 2150 hp, determine for the compressor: (a) the percent isentropic compressor efficiency and (b) the rate of entropy production, in hp/°R. Ignore kinetic and potential energy effects.
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -12oC with...
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -12oC with a volumetric flow rate of 0.18 m3/s. Refrigerant exits at 9 bar, 70oC. Changes in kinetic and potential energy from inlet to exit can be ignored. Determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kW.
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated...
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 8 bar. The isentropic compressor efficiency is 80%. The mass flow rate of refrigerant is 7 kg/min. Determine: (a) the compressor power, in kW, (b) the refrigeration capacity, in tons, (1 ton = 3.5168 kW) and, (c) the coefficient of performance, (d) rate of entropy production in kW/K, for the...
An ideal vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid....
An ideal vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 1 bar, and saturated liquid exits the condenser at 4 bar. The mass flow rate of refrigerant is 8.5 kg/min. Determine the compressor power, in kW.
Problem 6.100 SI Carbon dioxide (CO2) at 1 bar, 300 K enters a compressor operating at...
Problem 6.100 SI Carbon dioxide (CO2) at 1 bar, 300 K enters a compressor operating at steady state and is compressed adiabatically to an exit state of 10 bar, 590 K. The CO2 is modeled as an ideal gas, and kinetic and potential energy effects are negligible. For the compressor, determine: (a) the work input, in kJ per kg of CO2 flowing, (b) the rate of entropy production, in kJ/K per kg of CO2 flowing, and (c) the percent isentropic...
Air enters a compressor operating at steady state at 15.4 lbf/in^2, 80°F with a volumetric flow...
Air enters a compressor operating at steady state at 15.4 lbf/in^2, 80°F with a volumetric flow rate of 424 ft^3/min and exits at 176.4 lbf/in^2, 260°F. Heat transfer occurs at a rate of 6800 Btu/h from the compressor to its surroundings. Assuming the ideal gas model for air and neglecting kinetic and potential energy effects, determine the power input, in hp.