Question

Find the outside and inside diameter of a mild steel hollow shaft if with allowable shear...

Find the outside and inside diameter of a mild steel hollow shaft if with allowable shear stress (42 Mpa) with a transmitting torque of (955*10^3 N-mm) take the ratio of inside diameter to outside diameter (0.5)

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

In this Problem, we use torsion equation for hollow shaft and Calculate the diameter of hollow shaft by guven data in the Problem as below:-

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A solid steel shaft, 20 mm in diameter and 1 m long, is placed concentrically inside...
A solid steel shaft, 20 mm in diameter and 1 m long, is placed concentrically inside a hollow duralumin shaft with inside and outside diameters of 30 mm and 33 mm respectively and a length of 500 mm. The ends of the hollow shaft are rigidly fixed to the solid shaft. Determine (a) the torsional stiffness of the composite shaft (b) the maximum torque to which the composite shaft may be subjected if the allowable shear stresses for steel and...
A solid alloy shaft of 50 mm diameter is coupled in series with a hollow steel...
A solid alloy shaft of 50 mm diameter is coupled in series with a hollow steel shaft of same external diameter. Determine the internal diameter of the hollow steel shaft if the angle of twist per unit length in hollow shaft is 75% of that of the solid alloy shaft. Also, determine the speed at which the compound shaft must be driven to transmit 200 kW, if the limiting shear stresses are 55 MPa and 75 MPa in alloy and...
3. A 2014 T-4 aluminum hollow drive shaft has an outside diameter of 3 in, an...
3. A 2014 T-4 aluminum hollow drive shaft has an outside diameter of 3 in, an inside diameter of 2.9 in, and a length of 10.0 ft. It transmits a power of 120 hp at 300 rpm. Find the following (include units with your answers): a) the maximum torsional shear stress in the shaft (ksi)=   b) the angle of twist (deg)=  
To improve an engine transmission, a solid shaft will be replaced with a hollow shaft of...
To improve an engine transmission, a solid shaft will be replaced with a hollow shaft of better-quality steel resulting in an increase in the allowable stress of X%. In order to keep the existing bearings, the new shaft will have the same outside diameter as the existing, solid shaft. Determine: (a) the bore diameter of the hollow shaft in terms of outside diameter (b) the weight savings in percentage, assuming that the steel densities of both shafts are identical. CO5...
A hollow circular steel column 2m long and outer diameter 200 mm carries an axial load...
A hollow circular steel column 2m long and outer diameter 200 mm carries an axial load of 325 kN. If the compressive stress is 150 MPa, lateral strain for external diameter is is 0.000325 and Poisson’s ratio is 0.3, find the minimum wall thickness required for the column. Also calculate the shear modulus for the material of the column. Take E = 210 GPa.   
The drive shaft AB of an automobile with 1.7 m long is made of a steel...
The drive shaft AB of an automobile with 1.7 m long is made of a steel having an allowable shear stress τall = 60 MPa and modulus of rigidity G = 80 GPa. Limit angle of twist of the shaft is 0.035 rad. If the outer diameter of the shaft is 65 mm and the engine delivers 180 kW to the shaft when it is turning at 1170 rev/min, determine the minimum required thickness of the shaft’s wall.
A steel shaft transmits 20 kW of power at 10 Hz. Determine the smallest safe diameter...
A steel shaft transmits 20 kW of power at 10 Hz. Determine the smallest safe diameter of the shaft if the shear stress τmax is not to exceed 50 MPa and the angle of twist θ is limited to 5°in a length of 4 m. Use G = 70 GPa.
a cylindrical pressure vessel with an outside diameter of 1000 mm is constructed be spirally wrapping...
a cylindrical pressure vessel with an outside diameter of 1000 mm is constructed be spirally wrapping a 15 mm thick steel plate and butt-welding the mating edges of the plate, the butt-welded seams form an angle of 30 with a transverse plane through the cylinder as shows . if the allowable normal stress perpendicular to the weld and the allowable shear stress parallel to the weld are 40 MPa and 15 MPa a respectively, determine the permissible internal pressure in...
An automobile engine developes 38 h.p. at 1500 r.p.m. and its bottom gear ratio is 3.06....
An automobile engine developes 38 h.p. at 1500 r.p.m. and its bottom gear ratio is 3.06. If a propeller shaft of 4cm outside diameter is to be used, determine the inside diameter of mild steel tube to be used, assuming a safe shear stress of 562.5 kgf/cm2 for the mild steel.
Select right answer. A rotating steel flat disk has 200 mm inner diameter and 300 mm...
Select right answer. A rotating steel flat disk has 200 mm inner diameter and 300 mm outer diameter. If the maximum shear stress is to not exceed 200 MPa the allowable speed in rpm is around
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT