Question

Consider the vertical rear window of an automobile that has a thickness L= 9 mm and...

Consider the vertical rear window of an automobile that has a thickness L= 9 mm and height H=0.5 m with heating wires that create uniform volumetric heating. The window interior is exposed to ambient air at 10°C and the window exterior to air at -10°C which moves in parallel flow over the surface with a velocity of 20 m/s. The surface temperature of the window exterior is 12°C.

Using the correlation developed by Churchill and Chu, find the convective heat transfer coefficient for the window interior, in W/m2·K .

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
16a) A triple glazed window consists of 3 clear glass panes of 4 mm thickness each,...
16a) A triple glazed window consists of 3 clear glass panes of 4 mm thickness each, separated by two air cavities of 13 mm each in thickness. The window area is 1.0 m2 . If the thermal conductivity of the glass panes is 0.8 W•m-1•K-1 and of the air cavities is 0.026 W•m-1•K-1 what is the total thermal resistance of the window? (A) 2.452 K•W-1 (B) 0.015 K•W-1 (C) 1.015 K•W-1 (D) 6004 K•W-1 16b)A heater provides 305 W of...
A window has a glass surface of 2314 cm2 and a thickness of 3.5 mm. A)...
A window has a glass surface of 2314 cm2 and a thickness of 3.5 mm. A) Find the rate of energy transfer by conduc- tion through this pane when the temperature of the inside surface of the glass is 71◦F and the outside temperature is 81 ◦F. Assume the thermal conductivity of window glass is 0.8 J/s · m · ◦ C. Answer in units of kW. B) Find the rate of energy transfer for the same inside temperature and...
1. Consider a 1.8-m high and 1.5 m-wide double-pane window consisting of two 4-mm thick layers...
1. Consider a 1.8-m high and 1.5 m-wide double-pane window consisting of two 4-mm thick layers of glass (k = 0.78 W/m°C) separated by a 10-mm wide stagnant air space (k = 0.026 W/m°C). The room is maintained at 20°C while the temperature of the outdoors is -10°C. Take the convective heat transfer coefficients on the inner and outer surfaces of the window to be 10 W/m2°C and 40 W/m2°C, respectively. Determine the steady rate of heat transfer through this...
a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to...
a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to cooling airflow at 27 0C resulting in the convective coefficient, h = 114 W/ m2 K. The relevant properties of mild steel are given as follows: Density , /7850 2 mkg  Specific heat K kgJc p / 475 and thermal diffusivity hr m /043.0 2  Determine: (i) Time required to cool the sphere (lumped parameter system) from 540 0C to 950C. [7...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10 cm thick. Since the shaft exterior radiation beam coefficient is 0.8 and the flue gas temperature is 350°C, the external ambient temperature is 25°C and the outer ambient heat transport coefficient is 20 W/m2K; a) Calculate the shaft exterior temperature. b) In order to reduce the risk of burn injury that may occur in the body, the shaft is asked to be below 55°Cve...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT