Question

A rod of Titanium with a diameter of 5 mm and a length of 250 mm...

A rod of Titanium with a diameter of 5 mm and a length of 250 mm is subjected to an elastic force of 5900 N. a) Estimate the diameter of the rod when the load has been applied. b) What is the diameter of the rod when the load is completely removed?

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A rod of brass originally 600 mm long is pulled in tension along its longitudinal axis...
A rod of brass originally 600 mm long is pulled in tension along its longitudinal axis with a stress of 45 MPa. What will be the length of the rod when the stress is applied? A rod of Titanium with a diameter of 6 mm and a length of 300 mm is subjected to an elastic force of 5000 N. a) Estimate the diameter of the rod when the load has been applied. b) What is the diameter of the...
A metal rod that has a diameter of 1.0 cm and a length of 0.75 m...
A metal rod that has a diameter of 1.0 cm and a length of 0.75 m is stretched by 2.5 mm when subjected to a force of 115 kN (kilonewtons). Assuming that it remains in its elastic region, how much work would it take to compress this rod by 5.0 mm?
A rod has a square cross section of (5 x 5) mm. length of the rod...
A rod has a square cross section of (5 x 5) mm. length of the rod is 120 cm. The allowable stress is 400 MPa. After applying the load (F), square section changes to (4.95 x 4.95) mm. 1. What is the type of the load (F), is it tension or compression? 2. What is the longitudinal strain in steel rod? 3. What is the modulus of elasticity of the material of the rod? 4. What is the value of...
A 10-m rod with 5 mm in dimeter must elongate no more than 2 mm under...
A 10-m rod with 5 mm in dimeter must elongate no more than 2 mm under load. Rank the maximum force in Newtons that can be applied without yielding if the rod is made from (a) titanium, (b) 304 stainless steel, (c) aluminium, and (d) magnesium
A single crystal Al2O3 rod (precisely 6 mm diameter × 60 mm long) is used to...
A single crystal Al2O3 rod (precisely 6 mm diameter × 60 mm long) is used to apply loads to small samples in a high-precision dilatometer (a length-measuring device). Calculate the resulting rod dimensions if the crystal is subjected to a 27 kN axial compression load. Express your answer to five significant figures.
a solid circular steel rod has a length of 70 mm, diameter of 20 mm, and...
a solid circular steel rod has a length of 70 mm, diameter of 20 mm, and an eccentricity(offset) of 6 mm.Syiely =300Mpa. find the critical buckling load if its boundary condition are fixed-free(use theoretical value in table)
A steel rod without constrain has a length of 200 mm and diameter of 20 mm...
A steel rod without constrain has a length of 200 mm and diameter of 20 mm at a temperature of 25oC. If the rod is heated uniformly to 125oC, what will be the length and diameter (accurate to 1/100 mm). What will be the stress at 125oC? The linear coefficient of thermal expansion of steel is 12.5x10-6 m/m/C.
a.) An aluminum rod has an initial length of Lo = 670 [mm] and has an...
a.) An aluminum rod has an initial length of Lo = 670 [mm] and has an initial temperature of 24.5o. At what value should the temperature be raised such that the rod would expand at a length of 672.01[mm]? The coefficient of thermal expansion of aluminum is 23.80x10^-6 Co. b.) Three rods made of copper, aluminum, and brass has the same initial length Lo. All rods expand to the same final length L when subjected to change temperature. Which of...
Q3: Tension test was conducted on a mild steel rod having diameter 1.5 cm and length...
Q3: Tension test was conducted on a mild steel rod having diameter 1.5 cm and length 20 cm. While applying a load of 10 kN, there will be an extension of 0.012 cm on a length of 20 cm. Maximum load carried by the rod was found to be 26 kN and the load beyond which stress is not proportional to strain was observed to be 11 kN. When the specimen breaks, the extension of the rod for 20 cm...
A shaft of 2m length, 30 mm radius, with a wall thickness of 5 mm has...
A shaft of 2m length, 30 mm radius, with a wall thickness of 5 mm has a torque applied of 450 N. If the material has a G value of 275 GPa, what is the angular deflection in radians and degrees? Hint, you need to calculate the J value, T x l/J x G = deflection, and then convert to degrees. (up to 15 points) A torque of 1500 N on a shaft of 20 mm radius will have what...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT