Question

Ammonia is brought from saturated vapor at 300 kPa to 1400 kPa, 140oC in a steady...

Ammonia is brought from saturated vapor at 300 kPa to 1400 kPa, 140oC in a steady flow adiabatic compressor. Thermodynamic properties of ammonia at initial and final states are given as :

h1= hi = 1431.7 kJ/kg, s1 = s­i = 5.4565 kJ/kg-K

h2= he = 1752.8 kJ/kg, s2= se = 5.7023 kJ/kg-K         

h2,s = he,s = 1656.08 kJ/kg

a) Find the actual specific work input to the compressor.

b) Calculate the specific work input to the compressor for isentropic compression

c) Determine the isentropic efficiency of the compressor.

d) Estimate the specific entropy generation during the compression process.

Homework Answers

Answer #1

If you find my work helpful please give thumbs-up..

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Saturated water vapor at 300°F enters a compressor operating at steady state with a mass flow...
Saturated water vapor at 300°F enters a compressor operating at steady state with a mass flow rate of 5 lb/s and is compressed adiabatically to 550 lbf/in.2 If the power input is 2150 hp, determine for the compressor: (a) the percent isentropic compressor efficiency and (b) the rate of entropy production, in hp/°R. Ignore kinetic and potential energy effects.
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated...
A vapor-compression refrigeration cycle operates at steady state with Refrigerant 134a as the working fluid. Saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 8 bar. The isentropic compressor efficiency is 80%. The mass flow rate of refrigerant is 7 kg/min. Determine: (a) the compressor power, in kW, (b) the refrigeration capacity, in tons, (1 ton = 3.5168 kW) and, (c) the coefficient of performance, (d) rate of entropy production in kW/K, for the...
Carbon dioxide enters an adiabatic compressor at100 kPa and 300 K at a rate of 0.5...
Carbon dioxide enters an adiabatic compressor at100 kPa and 300 K at a rate of 0.5 kg/s and exits at 600 kPa and 450 K. Neglecting the kinetic energy changes, determine the isentropic efficiency of the compressor. Assume constant specific heats. please show all the work and how you got it please and thank you
1- A certain amount of O2, as an ideal gas, is contained in a cylinder-piston system...
1- A certain amount of O2, as an ideal gas, is contained in a cylinder-piston system and develops a process from T1 = 300 K, P1 = 200 kPa to T2 = 1500 K and P2 = 150 kPa. Determine the specific entropy change in kJ / (kg K). 2- A certain amount of H2O in a closed rigid cylinder is cooled from T1 = 800 ° F and P1 = 100 lbf / in2 to P2 = 20 lbf...
An adiabatic gas turbine uses air to produce work. Air expands adiabatically from 600 kPa and...
An adiabatic gas turbine uses air to produce work. Air expands adiabatically from 600 kPa and 287 C to 90 kPa and 67 C. Take specific heats at room temperature (300 K). a) Find the isentropic efficiency of the turbine. b) Find the work produced by the turbine for a mass flow rate of 2.5 kg/s. c) If the mass flow rate of air is again 2.5 kg/s, find the entropy generation under steady conditions.
Two kg water at 120°C with a quality of 25% has its temperature raised 20°C in...
Two kg water at 120°C with a quality of 25% has its temperature raised 20°C in a constant volume process. According to the thermodynamic tables in your textbook, what is the new specific entropy (in kJ/(kg?K))? -another qustion-: Consider the same ammonia heat engine as problems 6-5 and 6-6, which has the following reversible steps: 1 ? 2 Isothermal heating of saturated liquid @ 60°C to superheated vapor 2 ? 3 Adiabatic expansion to saturated vapor at -20°C 3 ?...
An isentropic compressor that takes in air from the atmosphere at 100 kPa and 300 K...
An isentropic compressor that takes in air from the atmosphere at 100 kPa and 300 K compresses it to 1 MPa. The compressor feeds into a rigid tank that is initially filled with 5 kg of air at a pressure of 500 kPa and a temperature of 500 K. Once the mass in the tank reaches 8 kg, the compressor will stop to prevent the tank from rupturing, which will occur if the pressure exceeds 1000 kPa. a) Determine the...
NO INTERPOLATION REQUIRED Air enters an adiabatic turbine at 1000 kPa and 1625 degrees C (state...
NO INTERPOLATION REQUIRED Air enters an adiabatic turbine at 1000 kPa and 1625 degrees C (state 1) with a mass flow rate of 5 kg/s and leaves at 100 kPa the isentropic efficiency of the turbine is 85%. Neglecting the kinetic energy change of the steam, and considering variable specific heats, determine: a. the isentropic power of the turbine Isentropic power in kW b. the temperature at the turbine exit temperature at exit in degrees C c. the actual power...
Initially (state 1) a well-insulated rigid tank contains 20 kg of a saturated liquid-vapor mixture of...
Initially (state 1) a well-insulated rigid tank contains 20 kg of a saturated liquid-vapor mixture of water at 100 kPa and half of the mass is in the liquid phase. An electric resistance heater placed in the tank is now turned on and kept on until all the liquid in the tank is vaporized (state 2). Determine (a) the initial specific volume in m3/kg, (b) the final specific entropy in kJ/kg.K and (c) change of entropy in kJ/K.
Initially (state 1) a well-insulated rigid tank contains 20 kg of a saturated liquid-vapor mixture of...
Initially (state 1) a well-insulated rigid tank contains 20 kg of a saturated liquid-vapor mixture of water at 100 kPa and half of the mass is in the liquid phase. An electric resistance heater placed in the tank is now turned on and kept on until all the liquid in the tank is vaporized (state 2). Determine (a) the initial specific volume in m3/kg, (b) the final specific entropy in kJ/kg.K and (c) change of entropy in kJ/K.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT