Question

Airflow (velocity of u∞=15m/s, the temperature of T∞= 15°C) sweep over a flat surface with an...

Airflow (velocity of u=15m/s, the temperature of T= 15°C) sweep over a flat surface with an area of 0.25 m2 and a temperature of 140 °C. The airflow induces a drag force of 0.25 N on the surface. What is the heat transfer rate across the surface? You can use Table A.4 in the lecture slides or other available data to evaluate air properties (Hint: Use Modified Reynolds analogy) (10 points)

Homework Answers

Answer #1

If this was helpful, please UPVOTE. THANK YOU !!

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Liquid water at velocity of 2 m/s and temperature of 15 °C flows over a flat...
Liquid water at velocity of 2 m/s and temperature of 15 °C flows over a flat plate. The plate has a width of 1 m, length of 0.4 m and surface temperature of 37 °C. Determine: (a) the average heat transfer coefficient. (b) the convection heat transfer rate from the top surfacc of the platc.
Air at a pressure of 1 atm and a temperature of 15C is in parallel flow...
Air at a pressure of 1 atm and a temperature of 15C is in parallel flow at a velocity of 10 m/s over a 3-m long flat plate that is heated to a uniform temperature of 140 C. (a) What is the average heat transfer coefficient and heat transfer rate for the plate? (b) What is the local heat transfer coefficient and heat flux at the midpoint of the plate? (c) Plot the variation of the heat flux with distance...
Air at freestream velocity U∞=16 ms, and free steam temperature      T∞=50℃ is flowing over a plate...
Air at freestream velocity U∞=16 ms, and free steam temperature      T∞=50℃ is flowing over a plate surface that is at temperature Ts=100℃. The velocity and thermal boundary layers developing on the surface have been shown in the figure. Also shown are the tangents to the velocity and temperature profiles at the surface y=0. If the density of air is ρ∞=1.1 kgm3, viscosity μ=1.963×10-5kgm∙s, and thermal conductivity k=0.0274Wm∙K then, calculate (a)        the wall shear stress, τw (b)       coefficient of skin friction,...
A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area...
A long 8-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 7°C and the wind is blowing across the pipe at a velocity of 47 km/h. The properties of air at 1 atm and the film temperature of (Ts + T∞)/2 = (90 + 7)/2...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT