Question
A closed, rigid tank is filled with a gas modeled as an ideal gas, initially at...
A closed, rigid tank is filled with a gas modeled as an ideal
gas, initially at 80°C and a gage pressure of 300 kPa. The gas is
heated, and the gage pressure at the final state is 500 kPa. The
local atmospheric pressure is 1 atm.
Determine the final temperature, in °C.
Homework Answers
Answer #1
Not the answer you're looking for?
Similar Questions
A closed, rigid tank is filled with water. Initially, the tank holds 1.0 lb of saturated...
A closed, rigid tank is filled with water. Initially, the tank
holds 1.0 lb of saturated vapor and 7.0 lb of saturated liquid,
each at 212°F. The water is heated until the tank contains only
saturated vapor. Kinetic and potential energy effects can be
ignored. Determine the volume of the tank, in ft3, the temperature
at the final state, in °F, and the heat transfer, in Btu.
Water of mass 2 kg in a closed, rigid tank is initially in the form of...
Water of mass 2 kg in a closed, rigid tank is initially in the
form of a twophase liquid-vapor mixture. The initial temperature is
50° C. The mixture is heated until the tank contains only saturated
vapor at 110° C.
(i) Find the initial pressure, in kPa.
(ii) Find the work for the process, in kJ.
(iii) Find the heat transfer for the process, in kJ.
A rigid 5.0-L container that is filled with neon gas initially has a temperature of 5.0⁰...
A rigid 5.0-L container that is filled with neon gas initially
has a temperature of 5.0⁰ C at a pressure of 80 kPa.
What is the pressure of the gas if its temperature increases to
40⁰ C? Name the thermal process that brought about the
temperature increase of the gas.
A rigid 5.0-L container that is filled with neon gas initially has a temperature of 5.0⁰...
A rigid 5.0-L container that is filled with neon gas initially
has a temperature of 5.0⁰ C at a pressure of 80 kPa. What is the
pressure of the gas if its temperature increases to 40⁰ C? Name the
thermal process that brought about the temperature increase of the
gas.
A rigid 5.0-L container that is filled with neon gas initially has a temperature of 5.0⁰...
A rigid 5.0-L container that is filled with neon gas initially
has a temperature of 5.0⁰ C at a pressure of 80 kPa. What is the
pressure of the gas if its temperature increases to 40⁰ C? Name the
thermal process that brought about the temperature increase of the
gas.
A rigid closed tank is full of oxygen at 120 kPa and 25 C. The mass...
A rigid closed tank is full of oxygen at 120 kPa and 25 C. The
mass of oxygen in the tank is 1.8
kg. A stirring device introduces 150 kJ of work and there is heat
loss to the surroundings in the
amount of 45 kJ. Find the final temperature in Celsius and pressure
in kPa.
Assume specific heats constant at room temperature (300 K).
A rigid closed tank is full of oxygen at 120 kPa and 25 C. The mass...
A rigid closed tank is full of oxygen at 120 kPa and 25 C. The
mass of oxygen in the tank is 1.8 kg. A stirring device introduces
150 kJ of work and there is heat loss to the surroundings in the
amount of 45 kJ. Find the final temperature in Celsius and pressure
in kPa. Assume specific heats constant at room temperature (300
K).
A cylinder contains an ideal gas at the temperature of 300 K and is closed by...
A cylinder contains an ideal gas at the temperature of 300 K and
is closed by a movable piston. The gas, which is initially at a
pressure of 3 atm occupying a volume of 30 L, expands isothermally
to a volume of 80 L. The gas is then compressed isobarically,
returning to its initial volume of 30 L. Calculate the work done by
gas: a) in isothermal expansion; b) in isobaric compression, c) in
the whole process; and d) Calculate...
A closed, rigid steel tank contains 1 lbm of water, initially at 260 F and a...
A closed, rigid steel tank contains 1 lbm of water, initially at
260 F and a quality of 60%. The tank is fitted with a paddle wheel
and the water is stirred until the temperature is 350 F. The tank
is well insulated on the outside and the steel is in thermal
equilibrium with the water. The mass of the steel tank itself (not
including water) is 60 lbm and the specific heat of the tank is
0.115 Btu/lbm·R. Changes...
A closed, rigid steel tank contains 1 lbm of water, initially at 260F and a quality...
A closed, rigid steel tank contains 1 lbm of water, initially at
260F and a quality of 60%. The tank is fitted with a paddle wheel
and the water is stirred until the temperature is 350F. The tank
is well insulated on the outside and the steel is in thermal
equilibrium with the water. The mass of the steel tank itself (not
including water) is 60 lbm and the specific heat of the tank is
0.115 Btu/lbm·R. Changes in kinetic...
ADVERTISEMENT
Need Online Homework Help?
Get Answers For Free
Most questions answered within 1 hours.
ADVERTISEMENT
Active Questions
asked 9 minutes ago
asked 17 minutes ago
asked 30 minutes ago
asked 33 minutes ago
asked 33 minutes ago
asked 37 minutes ago
asked 42 minutes ago
asked 47 minutes ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago
asked 1 hour ago