Question

A helical compression spring is made of hard‐drawn steel wire 0.080‐in in diameter, has an outside...

A helical compression spring is made of hard‐drawn steel wire 0.080‐in in diameter, has an outside diameter of 0.880 in, and a pitch of 0.040 in. The ends are plain and ground, and there are 8 total coils. If the spring is supported by two parallel plates, is it possible that the spring can buckle in service? Support your response quantitatively.

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A helical compression spring is made of 302 stainless steel wire. The outside coil diameter of...
A helical compression spring is made of 302 stainless steel wire. The outside coil diameter of the spring is 33.2 mm. The wire diamter is 2.8 mm. The ends are plain and ground, and there are total of 8.5 turns. Determine the deflection of the spring when it is subjected to a compression force of 10 N. In this condition, wil the stress generated in the spring be beyond the maximum allowable torsional stress?
A helical compression spring is made of 5mm diameter hard-drawn wire. Determine the torsional yield strength...
A helical compression spring is made of 5mm diameter hard-drawn wire. Determine the torsional yield strength of the wire in MPa.
A helical compression spring is made of 3mm diameter music wire. The outside coil diameter of...
A helical compression spring is made of 3mm diameter music wire. The outside coil diameter of the spring is 14mm. Find the static load of the spring in N if the torsional yield stress is 3.7GPa.
A helical compression spring is made of 3mm diameter music wire. The outside coil diameter of...
A helical compression spring is made of 3mm diameter music wire. The outside coil diameter of the spring is 14mm. Find the static load of the spring in N if the torsional yield stress is 3.7GPa.
A helical compression spring is made from music wire that is 1.04 mm in diameter and...
A helical compression spring is made from music wire that is 1.04 mm in diameter and has an outer coil diameter of 13.74 mm with a free length of 50.8 mm and 10 total coils with plain ends. What is the solid length Ls? What is the spring rate k in N/m ? If the spring rate is 1000 N/m what is the maximum shear stress, tau , in the wire when the spring is compressed 25.4 mm from its...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT