Question

how is the water pump bearing lubricated?

how is the water pump bearing lubricated?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An electric pump consumes 15 kW electricity, and is used to pump water at a volumetric...
An electric pump consumes 15 kW electricity, and is used to pump water at a volumetric rate of 50 L/s. The absolute pressures at the inlet and outlet of the pump 100 kPa and 300 kPa. Assuming that there is negligible difference in kinetic energy between the inlet and the outlet (how is that possible?) and that there is negligible difference in height between the inlet and the outlet, calculate: (A) the mechanical efficiency of the pump, and (B) the...
An initially empty tank is filled with water. The pump used is a displacement pump that...
An initially empty tank is filled with water. The pump used is a displacement pump that provides a flow of Q=0.5*(1+sin(t/30)) m3/min, where t is in seconds. Calculate the volume in the tank after 1hr
The pump in a water tower raises water with a density of ρw = 1.00 kg/liter...
The pump in a water tower raises water with a density of ρw = 1.00 kg/liter from a filtered pool at the bottom of the tower up hT = 25 m to the highest point of the tower. The water begins at rest in the pool and comes to rest at the highest point of the tower. The pump is 100% efficient in lifting the water, and it raises a volume of Vw = 8.6 liters of water up the...
The NPSHR for a pump is given by the pump manufacturer as 7.2 m. This pump...
The NPSHR for a pump is given by the pump manufacturer as 7.2 m. This pump is being used to pump water from a reservoir at a rate of 300 L/sec. Water temperature is 15 0C and 300C in winter and summer, respectively. Assume total head loss in the suction pipe is 1.5 m. Determine whether or not the pump is safe from cavitation in a) winter b) summer
Using Bernoulli Equation : 1) A water pump forces water up a vertical pipe with diameter...
Using Bernoulli Equation : 1) A water pump forces water up a vertical pipe with diameter 12 cm at a flow rate of 300 L/s. The pressure at the pump is 2.8 x 106 N/m2 . Two meters above the pump, the pipe reduces to a diameter of 8 cm. What is the pressure at that point?
Water at 30 ∘C is pressurized in a pump from 80 kPa to 1600 kPa. If...
Water at 30 ∘C is pressurized in a pump from 80 kPa to 1600 kPa. If this requires 1.82 kJ for every kg of water that moves through the pump, then what is the isentropic efficiency of the pump? (Assume the mechanical efficiency is 100%)
(a) A water pump has an inlet conditions of 4.55 MPa and 20oC. The outlet of...
(a) A water pump has an inlet conditions of 4.55 MPa and 20oC. The outlet of the pump is at a pressure of 18.00 MPa. What is the enthalpy change across a reversible pump in kJ/kg? (b) For a real system, which of the following pumps might be considered for the job? 12.80 kJ/kg 13.48 kJ/kg 14.18 kJ/kg (c) If a real pump for the states given in (a) has and efficiency of 0.78, what would be the enthalpy change...
(a) A water pump has an inlet conditions of 4.55 MPa and 20oC. The outlet of...
(a) A water pump has an inlet conditions of 4.55 MPa and 20oC. The outlet of the pump is at a pressure of 18.00 MPa. What is the enthalpy change across a reversible pump in kJ/kg? (b) For a real system, which of the following pumps might be considered for the job? 12.80 kJ/kg 13.48 kJ/kg 14.18 kJ/kg (c) If a real pump for the states given in (a) has and efficiency of 0.78, what would be the enthalpy change...
A pump will be used to convey water from a lake into a pressurized storage tank...
A pump will be used to convey water from a lake into a pressurized storage tank for a secluded cabin vacation house. If 1000 gallons of water must be delivered in 10 minutes or less, will a pump that adds 3 hp to the water be sufficient? Explain and support your answer with calculations.    Assume 2 atm for the pressurized tank, and 20 ft difference in elevation from lake to water surface level in pressurized tank. ANSWER: 3 HP...
A tank is full of water. Find the work required to pump the water out of...
A tank is full of water. Find the work required to pump the water out of the spout. Use the fact that water weighs 62.5 lb/ft3. (Assume a = 6 ft, b = 9 ft, and c = 10 ft.)