Question

Consider a steady-state operating condition where the above motor drive’s input voltage, external load torque, armature...

Consider a steady-state operating condition where the above motor drive’s input voltage, external load torque, armature current, and shaft speed are all constant. Derive an analytic expression for the motor’s electric-to-mechanical energy conversion efficiency in terms of external load torque and shaft angular speed.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A separate excited DC motor is running at 1000 rpm when the armature voltage is 600...
A separate excited DC motor is running at 1000 rpm when the armature voltage is 600 V. The motor has a field constant Kphi = 4 V.sec and the armature resistance of the motor is 0.8 Ohms. i. Calculate the value of the resistance of the dynamic braking at full load. The armature current should be limited to 200 % of the rated value. ii. If the motor operates in regenerative braking at a speed of 1200 rpm, calculate the...
The full-load armature current of a 5 hp, 150 V shunt dc motor is 30 A....
The full-load armature current of a 5 hp, 150 V shunt dc motor is 30 A. The field (shunt) resistance and the armature resistance of the motor are ????F = 125 ? and ???????? = 0.15, respectively. At a random speed of 1800 rpm magnetization curve of the motor has measured and is shown in the table below. ????0 (V) armature voltage 10 90 110 140 170 185 ???????? (A) field (shunt) current 0 0.82 1 1.2 1.7 2.88 Calculate...
A 25-hp, 240V, DC shunt motor has armature and field resistances of 0.2 ? and 120...
A 25-hp, 240V, DC shunt motor has armature and field resistances of 0.2 ? and 120 ?, respectively. At no load and rated voltage, the motor draws a line current of 5A and its speed is 1250 rpm. When driving a certain load, the input to the motor is 15KW. For this condition, find: a.The speed of the motor b.The developed torque The efficiency of the motor at this load
Question 2 The full-load armature current of a 5 hp, 150 V shunt dc motor is...
Question 2 The full-load armature current of a 5 hp, 150 V shunt dc motor is 30 A. The field (shunt) resistance and the armature resistance of the motor are ????F=125 ? and ????????=0.15, respectively. At a random speed of 1800 rpm magnetization curve of the motor has measured and is shown in the table below. EO(V) armature voltage 10 90 110 140 170 185 IF (A) field (shunt) current 0 0.82 1 1.2 1.7 2.88 Calculate the following: a....
Why does steady state rotor speed decrease with load torque for series motor and remain constant...
Why does steady state rotor speed decrease with load torque for series motor and remain constant for shunt and separately excited motors? What effect of field current have on motor speed?
A 200 V DC, 1,800 RPM shunt connected motor has an armature resistance of 0.4 ohm...
A 200 V DC, 1,800 RPM shunt connected motor has an armature resistance of 0.4 ohm and a brush resistance of 0.4 ohm; brush voltage drop of 6.0 V, independent of load. The resistance of the shunt field is 230 ohm. The full load rated line current is 40 A. When the motor is operated at no load the line current is 5 A and the speed is 1750 RPM. Calculate speed at rated load Calculate speed at .3 rated...
Electric Drive Problem 1) Why does steady state rotor speed decrease with load torque for series...
Electric Drive Problem 1) Why does steady state rotor speed decrease with load torque for series motor and remains nearly constant for shunt and separately excited motor has ? What effect does field current have on rotor speed?