Question

what are the fittings used for vertical flash separator?? what is the insulating material used for...

what are the fittings used for vertical flash separator??
what is the insulating material used for vertical flash separator???

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
how to calculate the Working pressure of vertical flash separator??
how to calculate the Working pressure of vertical flash separator??
A power plant uses an adiabatic single-flash process coupled with a liquid-vapor separator and a turbine....
A power plant uses an adiabatic single-flash process coupled with a liquid-vapor separator and a turbine. (1) Flash Chamber (2) Seperator (3) Steam Turbine. Saturated liquid water enters the flash chamber (which behaves like a throttling valve) at 230 degrees C at a rate of 44 kg/s and leaves at a pressure of 700 kPa. The stream then enters the separator where the liquid is collected at the bottom of the unit while the vapor portion of the stream continues...
The potential between the two parallel plates used as speed separator is 5,0V and the magnetic...
The potential between the two parallel plates used as speed separator is 5,0V and the magnetic field in the inner-plate region is 2,0T. What will be the speed of the protons that will pass through this speed separator without deviation.(mp=10-27 Kg) (NOTE: you will determine the polarization direction of the plates and the direction of the magnetic field.)
Determination of Thermal Conductivity. In determining the thermal conductivity of an insulating material, the temperatures were...
Determination of Thermal Conductivity. In determining the thermal conductivity of an insulating material, the temperatures were measured on both sides of a flat slab of 25 mm of the material and were 318.4 and 303.2 K. The heat flux was measured as 35.1 W/m^2. Calculate the thermal conductivity in btu/h*ft*Fahrenheit and in W/m*Kelvins
What is the flash point of a mixture of 2000 barrels of oil with a flash...
What is the flash point of a mixture of 2000 barrels of oil with a flash point of 100 °F, 3000 barrels with a flash point of 80 °F and 5000 barrels with a 150 °F flash point?
A new method of pre-coating fittings used in oil, brake, and other fluid systems in heavy-duty...
A new method of pre-coating fittings used in oil, brake, and other fluid systems in heavy-duty trucks is being studied. How large a sample is needed to estimate the proportion of fittings that leak to within 2% with 90% confidence? Please explain how to find the sample size from just percent confidence and (margin of error?)
The combustion of magnesium used to be used in flash bulbs because of the brightness of...
The combustion of magnesium used to be used in flash bulbs because of the brightness of its flash. What is the heat of combustion of magnesium anyway? a) (4pts) To determine the heat of combustion, I burned a 0.532 g sample of magnesium in a constant volume bomb calorimeter and the temperature of the water increased by 6.318 oC. Calculate the heat of      combustion of my sample of Mg, in kJ/mol, given that the heat capacity of the calorimeter is...
You recently purchased a used camera with an electric flash. After taking a roll of pictures...
You recently purchased a used camera with an electric flash. After taking a roll of pictures you are disappointed that the flash isn
A steam pipe is covered with 1.50 cm thick insulating material with a thermal conductivity of...
A steam pipe is covered with 1.50 cm thick insulating material with a thermal conductivity of 0.200 cal/cm·°C·s. How much energy is lost every second when the steam is at 250°C and the surrounding air is at 20.0°C? The pipe has a circumference of 800 cm and a length of 65.0 m. Neglect losses through the ends of the pipe.
Lightning Flash In a given lightning flash, the potential difference between a cloud and the ground...
Lightning Flash In a given lightning flash, the potential difference between a cloud and the ground is 3.9 ? 109 V and the quantity of charge transferred is 39 C. (a) What is the decrease in energy of that transferred charge? ____GJ (b) If all that energy could be used to accelerate a 1000 kg automobile from rest, what would be the automobile's final speed? ____m/s (c) If the energy could be used to melt ice, how much ice would...