Question

A grain bin (D = 3 m, H = 10 m) containing shelled corn has a...

A grain bin (D = 3 m, H = 10 m) containing shelled corn has a flow of 3,750 CFM air at 70°F. Calculate power required to overcome pressure drop caused by grain alone.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A naturally aspirated six cylinder, 6.128-L (374-in^3) diesel engine consumes 21.9 kg/h (48 lb/h) of fuel...
A naturally aspirated six cylinder, 6.128-L (374-in^3) diesel engine consumes 21.9 kg/h (48 lb/h) of fuel and 440 kg/h (970 lb/h) of air while running at 2400 r/min (rpm) and producing 93.8 kW (126 hp) of brake power. Assume the barometric pressure is 100 kPa (14.5 psi) and the ambient air temperature is 300 degrees K (540 degrees R). A. Calculate the theoretical air consumption of the engine. B. Calculate the volumetric efficiency. C. Calculate the air to fuel ratio....
A naturally aspirated six cylinder, 6.128-L (374-in^3) diesel engine consumes 21.9 kg/h (48 lb/h) of fuel...
A naturally aspirated six cylinder, 6.128-L (374-in^3) diesel engine consumes 21.9 kg/h (48 lb/h) of fuel and 440 kg/h (970 lb/h) of air while running at 2400 r/min (rpm) and producing 93.8 kW (126 hp) of brake power. Assume the barometric pressure is 100 kPa (14.5 psi) and the ambient air temperature is 300 degrees K (540 degrees R). A. Calculate the theoretical air consumption of the engine. B. Calculate the volumetric efficiency. C. Calculate the air to fuel ratio....
An air-standard Brayton cycle has a compressor pressure ratio of 10. Air enters the compressor at...
An air-standard Brayton cycle has a compressor pressure ratio of 10. Air enters the compressor at p1 = 14.7 lbf/in.2, T1 = 70°F, with a mass flow rate of 90,000 lb/h. The turbine inlet temperature is 1800°R. Calculate the thermal efficiency and the net power developed, in horsepower, if (a) the turbine and compressor isentropic efficiencies are each 100%. % hp (b) the turbine and compressor isentropic efficiencies are 88 and 84%, respectively. % hp (c) the turbine and compressor...
A small rocket probing the atmosphere has a length of 3 m. It is fired vertically...
A small rocket probing the atmosphere has a length of 3 m. It is fired vertically upward through the atmosphere, its average velocity being 1000 m/s. Consider the flow over the rocket at this average velocity at altitudes of 30,000 and 80,000 m. Can the air flow over the rocket be assumed to be continuous at these two altitudes? At an altitude of 30,000 m, the air has a temperature, pressure, and viscosity of ?55°C, 120 Pa, and 1.5 ×...
A lubricating line with e/D = 2 x 10-5 has an inside diameter of 0.5 in...
A lubricating line with e/D = 2 x 10-5 has an inside diameter of 0.5 in and is 30 in. long. If the pressure drop is 15 psi, determine the flow rate of oil(ft3/s). The oil has a kinematic viscosity of 0.07 x 10-3 ft2/s and a density of59 lbm/ft3.
Gas mixture containing H2S and air from a petroleum distillation column, has its concentration of H2S...
Gas mixture containing H2S and air from a petroleum distillation column, has its concentration of H2S reduced from 4.0 mol% to 0.1 mol% by scrubbing with a triethanolamine-water solvent in a countercurrent tower, operating at 300 K and at atmospheric pressure. H2S is soluble in such a solution and the equilibrium relation may be taken as Ye = 2.2X. The solvent enters the tower free of H2S and leaves containing 0.015 kmol of H2S/kmol of solvent. The overall coefficient for...
6) A helium gas containing 10^26 He atoms has a pressure of 10.0 atm at a...
6) A helium gas containing 10^26 He atoms has a pressure of 10.0 atm at a volume of 1.00 m^3. a) What is its temperature? b) If an isothermal process expands the gas to 3.00 m^3, what is then the pressure? c) Would heat have to be added or removed in order to do this? d) If the expansion was instead adiabatic, would the work needed be smaller or larger? why? 7) A 1.5 kg mass is hanging from a...
A) It has a 1000 turns toroid L = 4 (H) inductance with a radius of...
A) It has a 1000 turns toroid L = 4 (H) inductance with a radius of 1 m. This toroid is designed to energize for a home that needs 10 kW of power during an electrical outage and energizes for 4 minutes. Calculate the current that will pass over the toroid and the magnetic field that will occur in the toroid. µ0 = 4 π 10 -12 (F / m). B) With a defibrillator device, when the human heart stops,...
A pump delivers water (r= 1000 kg/m3, µ= 0.860x10-3 kg/m·s) from one reservoir to another reservoir...
A pump delivers water (r= 1000 kg/m3, µ= 0.860x10-3 kg/m·s) from one reservoir to another reservoir through 120 m of 0.05 m diameter pipe. Volumetric flow rate in the pipe line is measured with venturi meter. Throat diameter of venturi meter is 38 mm and pressure drop in the venturi meter is 156.9 kPa.The surface of the pipe is rough e/D=0.0001. Calculate the power of the pump required for the water–transfer. See the figure below for several pipe– fittings installed...
Incorrect answer. Your answer is incorrect. Try again. An air-standard Brayton cycle has a compressor pressure...
Incorrect answer. Your answer is incorrect. Try again. An air-standard Brayton cycle has a compressor pressure ratio of 10. Air enters the compressor at p1 = 14.7 lbf/in.2, T1 = 70°F, with a mass flow rate of 90,000 lb/h. The turbine inlet temperature is 1900°R. Calculate the thermal efficiency and the net power developed, in horsepower, if (a) the turbine and compressor isentropic efficiencies are each 100%. Entry field with incorrect answer 47.56 % Entry field with incorrect answer 5468.73...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT