Question

A single riveted lap joint rivet is made on a thick plate with a diameter of...

A single riveted lap joint rivet is made on a thick plate with a diameter of 20 mm. Determine the strength of the connection, if the pitch of the rivet is 60 mm. Assume ??? = 120 MPa; ? = 90 MPa and ??? = 160 MPa.

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A triple riveted butt joint which is used to connect two 8 mm thick plates. The...
A triple riveted butt joint which is used to connect two 8 mm thick plates. The rivet diameter and the pitch are 10 mm and 50 mm respectively. Determine the efficiency of the riveting system. Assume the rivet material has the same properties of plate material used if need power 1kw velocity 500rpm ultimate stress 680Mpa yield stress 400Mpa shaft diameter50mm   tension=compression
A plate 400mm wide and 0.03 mm thick with strength of 400Mpa is to shear. During...
A plate 400mm wide and 0.03 mm thick with strength of 400Mpa is to shear. During shearing process a 1000mm mean diameter flywheel changes its speed from 220 to 200 rpm. Determine the weight of flywheel to be used.
‏A 50 mm diameter shaft is made from carbon steel having ultimate tensile strength of 630...
‏A 50 mm diameter shaft is made from carbon steel having ultimate tensile strength of 630 MPa. It is subjected to a torque which fluctuates between 2000 N-m to - 800 N-m. Using Soderberg me thod, calcukate the factor of safety. Assume suitable values for any other data needed.
71 mm thick horizontal plate made of an opaque material of thermal conductivity k= 25 W/m-K....
71 mm thick horizontal plate made of an opaque material of thermal conductivity k= 25 W/m-K. At the bottom, water flows at a temperature of T∞,w = 25C, whereas air flows at the top of the plate at T∞,a = 710 C having convection coefficient of ha= 71 W/m2-K. Assuming a diffused top of the plate that receives an irradiated flux of 7100W/m2, of which 30% is reflected back. The top and bottom surface temperatures are maintained at 43 C...
A 3-m-internal-diameter spherical tank made of 1-cm-thick stainless steel is used to store iced water at...
A 3-m-internal-diameter spherical tank made of 1-cm-thick stainless steel is used to store iced water at 0°C. The tank is located outdoors at 18°C. Assume the entire steel tank to be at 0°C and thus the thermal resistance of the tank to be negligible. The heat of fusion of water at atmospheric pressure is hif = 333.7 kJ/kg. The emissivity of the outer surface of the tank is 0.75, and the convection heat transfer coefficient on the outer surface can...
City water will be cooled in a heat exchanger by sea water entering at 15°C. The...
City water will be cooled in a heat exchanger by sea water entering at 15°C. The outlet temperature of the sea water is 20°C. City water will be recirculated to reduce water consumption. The suction line of the pump has an inner diameter of 154 mm, is 22 m long, and has two 90° bends and a hinged check valve. The pipe from the pump to the heat exchanger has an inner diameter of 127 mm, is 140 m long,...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10...
1. An oven chimney is made of brick with a heat transmission coefficient 1.1 W/mK 10 cm thick. Since the shaft exterior radiation beam coefficient is 0.8 and the flue gas temperature is 350°C, the external ambient temperature is 25°C and the outer ambient heat transport coefficient is 20 W/m2K; a) Calculate the shaft exterior temperature. b) In order to reduce the risk of burn injury that may occur in the body, the shaft is asked to be below 55°Cve...
Your firm works in construction and buys ASTM A325M8S bolts in very large numbers. You are...
Your firm works in construction and buys ASTM A325M8S bolts in very large numbers. You are interested in purchasing bolts from different suppliers and have obtained and tested samples of 200 bolts from three suppliers: Allnutt, Boltzman, Coachers.You have tested these in your new bolt testing machine, purchased after you had discovered your old bolt testing machine was performing erratically. (For the purposes of this question, you are safe to assume that the new machine works perfectly and that its...
What tools could AA leaders have used to increase their awareness of internal and external issues?...
What tools could AA leaders have used to increase their awareness of internal and external issues? ???ALASKA AIRLINES: NAVIGATING CHANGE In the autumn of 2007, Alaska Airlines executives adjourned at the end of a long and stressful day in the midst of a multi-day strategic planning session. Most headed outside to relax, unwind and enjoy a bonfire on the shore of Semiahmoo Spit, outside the meeting venue in Blaine, a seaport town in northwest Washington state. Meanwhile, several members of...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT