Question

What are the principal polymers used in fiber-reinforced polymers?

What are the principal polymers used in fiber-reinforced polymers?

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

Fiber reinforced polymers or plastics are the materials which is made of composite of two materials.. One of them is polymers and another one is the Fibers...

In short abbreviation it is called as FRP material.

Mainly used polymers in FRP are epoxy polymers, vinylester polymers, thermosetting polymers..Although phenol formaldehyde is still in use for FRP.

Main reason for making composites of fibers with polymers is to increase it's tensile strength and modulus of elasticity.. So any material which needs these kind of property with suitable applications are principal polymers..

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Composite materials are to be prepared with the following compositions (by volume): -20% glass fiber reinforced...
Composite materials are to be prepared with the following compositions (by volume): -20% glass fiber reinforced polypropylene -epoxy reinforced by 25% carbon fiber and 25% Kevlar fiber. In each case, please find the mass of each constituent required per unit mass of composite. The densities (in kg m-3) are glass fiber 2540; polypropylene 900; carbon fiber 1790; Kevlar fiber 1450; and epoxy 1300.
plain crment concrete Reinforced Cement Concrete High Performance Concrete Fiber Reinforced Concrete for each type which...
plain crment concrete Reinforced Cement Concrete High Performance Concrete Fiber Reinforced Concrete for each type which range of strength it use?
for a continuous and aligned Kevlar-29 fiber-reinforced composite, the modulus elasticity in the longitudinal direction is...
for a continuous and aligned Kevlar-29 fiber-reinforced composite, the modulus elasticity in the longitudinal direction is 19 GPa and the modulus of elasticity in the transverse direction is 7.7 GPA​. if the volume fraction of fibers is 0.40, what is the modulus of elasticity for the fiber phase?
For a continuous and oriented fiber-reinforced composite, the moduli of elasticity in the longitudinal and transverse...
For a continuous and oriented fiber-reinforced composite, the moduli of elasticity in the longitudinal and transverse directions are 19.7 and 3.66 GPa (2.8×106 and 5.3×105 psi), respectively. If the volume fraction of fibers is 0.38, determine the moduli of elasticity of fiber and matrix phases.
3. Composites with fiber-reinforced structures with continuous and aligned fiber properties are made of 45 vol%...
3. Composites with fiber-reinforced structures with continuous and aligned fiber properties are made of 45 vol% aramid fiber and 55 vol% polycarbonate matrix. The mechanical characteristics of the two materials can be shown in the following table Modulus of Elasticity [GPa (psi)] Tensile Strength [MPa (psi)] Aramid fiber 131 (19 × 106) 3600 (520000) Polycarbonate 2.4 (3.5 × 105) 65 (9425) When the aramid fiber breaks, the stress on the polycarbonate matrix will be 35 MPa (5075 psi). Determine it...
A continuous and aligned carbon fiber-reinforced composite consists of 60% by volume of high-strength carbon fibers...
A continuous and aligned carbon fiber-reinforced composite consists of 60% by volume of high-strength carbon fibers having a tensile strength of 3.9 GPa reinforced in a polyester resin that, when hardened, displays a tensile strength of 50 MPa. What is the tensile strength of this composite in the longitudinal direction?
Consider a UD carbon fiber reinforced epoxy composite (Ef = 240 GPa, Em = 8 GPa)...
Consider a UD carbon fiber reinforced epoxy composite (Ef = 240 GPa, Em = 8 GPa) subjected to axial and transverse tensile loads. 1. Plot the variation of E1 and E2 with fiber volume fraction (vf).
5. (15 pts) Electrostatic fiber spinning or Electrospinning is widely used for fabricating nano fiber scaffolds...
5. (15 pts) Electrostatic fiber spinning or Electrospinning is widely used for fabricating nano fiber scaffolds of polymers mimicking ECM in tissue engineering applications. a. Explain the principle of electrospinning for producing fine nanodiameter fibers. How various process and polymer solution parameters affect the fiber-size or diameter . b. What are the difficulties and concerns in nano spinning collagen proteins by electrospinning? c. Explain the micro-structural changes in poly(lactide-co-caprolactone), PLCL, due to electrospinning (Answer with the help of a search...
A fiber-reinforced composite material has moduli of elasticity in the longitudinal and transverse directions of 6.9...
A fiber-reinforced composite material has moduli of elasticity in the longitudinal and transverse directions of 6.9 GPa and 3.5 GPa, respectively. If fibers make up 25% of the composite volume and 56% of them are oriented in the longitudinal direction, find the moduli of elasticity of the fiber and matrix phases. Assume that all fibers not oriented in the longitudinal direction are oriented transversely.
( Calculate the modulus of elasticity of a fiber-reinforced polymer composite under isostrain condition if the...
( Calculate the modulus of elasticity of a fiber-reinforced polymer composite under isostrain condition if the composite consists of 35% fibers and 65% polymer by volume. Also, calculate the percentage of load carried by the fibers. The modulus of elasticity of the fibers and the polymer are 345 GPa and 3.5 GPa, respectively .
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT