Question

Combustion gases passing through a 2.3-cm-internal diameter circular tube are used to vaporize waste water at...

Combustion gases passing through a 2.3-cm-internal diameter circular tube are used to vaporize waste water at atmospheric pressure. Hot gases enter the tube at 115 kPa and 250°C at a mean velocity of 5 m/s, and leave at 150°C. If the average heat transfer coefficient is 120 W/m2 °C and the inner surface temperature of the tube is 112°C, determine the tube length. Answer in cm with two(2) decimal places.

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 3-m-internal-diameter spherical tank made of 1-cm-thick stainless steel is used to store iced water at...
A 3-m-internal-diameter spherical tank made of 1-cm-thick stainless steel is used to store iced water at 0°C. The tank is located outdoors at 18°C. Assume the entire steel tank to be at 0°C and thus the thermal resistance of the tank to be negligible. The heat of fusion of water at atmospheric pressure is hif = 333.7 kJ/kg. The emissivity of the outer surface of the tank is 0.75, and the convection heat transfer coefficient on the outer surface can...
An aluminum fin 1.6 mm thick surrounds a tube 2.5 cm in diameter. The length of...
An aluminum fin 1.6 mm thick surrounds a tube 2.5 cm in diameter. The length of the fin is 12.5 mm. The tube-wall temperature is 200◦C, and the environment temperature is 20◦C. The heat-transfer coefficient is 60 W/m2 · ◦C. Consider the heat dissipated in a pipe 1.20 m long if the fins are 4.2 mm apart from center to center Explain your procedure with formulas
Water at 15°C enters a tube of 2 cm of diameter with flow rate 3953 kg/h....
Water at 15°C enters a tube of 2 cm of diameter with flow rate 3953 kg/h. Assume the ratio L/D>10, and the wall temperature is constant at 80-C. The outlet temperature is 50°C The properties of water at the film temperature are density rho = p = 985 kg/m3, specific heat Cp = 4180 J/kgk, conductivity k = 0.651 W/mK, dynamic viscosity mu= u = 4.71 × 10- kg/ms, At the wall temperature of 80°C we have dynamic viscosity muw=...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT