Question

Question # 3 Part A. An 02-series ball bearing is to be selected to carry a...

Question # 3 Part A. An 02-series ball bearing is to be selected to carry a radial load of 8 kN and a thrust load of 4 kN. The desired life LD is to be 5000 h with an inner-ring rotation rate of 900 rev/min. What is the basic load rating that should be used in selecting a bearing of a reliability goal of 0.80? Is it a safe decision?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A straight (cylindrical) roller bearing is subjected to a radial load of 20.2 kN. The life...
A straight (cylindrical) roller bearing is subjected to a radial load of 20.2 kN. The life is to be 8000 h at a speed of 940 rev/min and exhibit a reliability of 0.9. What Basic Load Rating should be used in selecting the bearing from a catalog of manufacturer 2 in Table 11-6? The catalog load rating _____ kN.
Select a single row, deep-groove ball bearing to carry a radial load of 300 lb and...
Select a single row, deep-groove ball bearing to carry a radial load of 300 lb and a thrust load of 200 lb. The outer race is rotating at a speed of 350 rpm, and a design life of 40000 hr is desired. A bearing with a basic dynamic load rating of 7500 lb and a basic static load rating of 5850 lb is proposed. Will it work? solve it in details, thank you.
An SKF Tapered roller bearing has an axial load Fa of 2220 N and a radial...
An SKF Tapered roller bearing has an axial load Fa of 2220 N and a radial load Fr of 2800 N applied with the inner ring stationary. The basic static load rating C0 is 14800 N and the basic load rating C10 is 35150 N. 1. Determine e. 2. Determine Yi. 3. Determine Fe. 4. Estimate the bearing life at a speed of 720 rev/min.
The worm shaft shown in part a of the figure transmits 1.2 hp at 500 rev/min....
The worm shaft shown in part a of the figure transmits 1.2 hp at 500 rev/min. A static force analysis gave the results shown in part b of the figure. Bearing A is to be an angular-contact ball bearing mounted to take the 555-lbf thrust load. The bearing at B is to take only the radial load, so a straight roller bearing will be employed. Use an application factor of 1.3, a desired life of 30 kh, and a reliability...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT