Question

From: Automation, Production Systems, and Computer-Integrated Manufacturing (4th Edition)        

The part in Figure P7.27 is to be drilled on a turret-type drill press. The part is 15.0 mm thick. There are threedrill sizes to be used: 8 mm, 10 mm, and 12 mm. These drills are to be specified in the part program by toolturret positions T01, T02, and T03. All tooling is high speed steel. Cutting speed = 75 mm/min and feed = 0.08mm/rev. Use the lower left corner of the part as the origin in the x-y axis system. Write the part program in theword address format using absolute positioning. The program style should be similar to Example A7.1?

Answer 1