Question

Take ???? = 1.004 kJ/kg.K, ???? = 0.718 kJ/kg.K, ?? = 1.4 for all problems that...

Take ???? = 1.004 kJ/kg.K, ???? = 0.718 kJ/kg.K, ?? = 1.4 for all problems that include gas cycles.

An ideal Brayton cycle has a compression ratio of 12 with a high temperature of 1600K and inlet temperature and pressure of 17oC and 100kP respectively, determine the added heat the net work.An ideal Brayton cycle has a compression ratio of 12 with a high temperature of 1600K and inlet temperature and pressure of 17C and 100kP respectively, determine the added heat the net work.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A Diesel cycle has a compression ratio of 12 and cut-off ratio of 2. At the...
A Diesel cycle has a compression ratio of 12 and cut-off ratio of 2. At the beginning of the isentropic-compression process, the pressure and temperature are 100 kPa and 35°C (308 K), respectively. During the constant-pressure process, heat is added to the working fluid from a reservoir at a temperature of 1760°C (2033 K). During the constant volume process, heat is rejected to the environment, which is at 30°C (303 K) and 100kPa. For the air involved, it may be...
An ideal Diesel cycle has a cut off ratio of 2. The temperature of the air...
An ideal Diesel cycle has a cut off ratio of 2. The temperature of the air at the beginning and at the end of the compression process are 300 K and 900 K respectively. By utilizing constant specific heats, taking the specific heat ratio, k = 1.4, Cp = 1.005 kJ/kg K and Cv = 0.718 kJ/kg K. Determine the followings: (i) The compression ratio. [5 marks] (ii) The maximum cycle temperature. [5 marks] (iii) The amount of heat transferred...
An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression...
An ideal Otto cycle has a compression ratio of 7. At the beginning of the compression process, P1 = 90 kPa, T1 = 27°C, and V1 = 0.004 m3. The maximum cycle temperature is 1147°C. For each repetition of the cycle, calculate the heat rejection and the net work production. Also, calculate the thermal efficiency and mean effective pressure for this cycle. Use constant specific heats at room temperature. The properties of air at room temperature are cp = 1.005...
n ideal air-standard Brayton cycle operates at steady state with compressor inlet conditions of 290 K...
n ideal air-standard Brayton cycle operates at steady state with compressor inlet conditions of 290 K and 95 kPa and a fixed turbine inlet temperature of 1650 K. For a compressor pressure ratio of 10, determine: (a) the exhaust temperature of the cycle, in K. (b) the back work ratio. (c) the net work developed per unit mass flowing, in kJ/kg. (d) the heat addition per unit mass flowing, in kJ/kg. (e) the thermal efficiency for the cycle.
10) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the...
10) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the compression process, the temperature is 20°C, and the pressure is 100 kPa. The heat added is 500 kJ/kg. Determine the cycle efficiency, work output, and the heat rejected. 11)An air-standard Otto cycle operates with a minimum temperature of 300 K and a maximum temperature of 1700 K. The compression ratio of the cycle is 7. At the beginning of the compression process, the pressure...
1) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the...
1) An air-standard Otto cycle has a compression ratio of 9. At the beginning of the compression process, the temperature is 20°C, and the pressure is 100 kPa. The heat added is 500 kJ/kg. Determine the cycle efficiency, work output, and the heat rejected 2) An air-standard Otto cycle operates with a minimum temperature of 300 K and a maximum temperature of 1700 K. The compression ratio of the cycle is 7. At the beginning of the compression process, the...
In an ideal standard dual cycle, the pressure and temperature at the beginning of compression are...
In an ideal standard dual cycle, the pressure and temperature at the beginning of compression are 1 bar and 47°C, respectively. The heat supplied in the cycle is 1250kJ/kg, two third of this heat is being added at constant volume and the remaining heat is added at constant pressure. If the compression ratio is 16, determine 1)the maximum temperature in the cycle. 2)the thermal efficiency of the cycle. 3)the mean effective pressure.
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
Consider a cold air-standard Diesel cycle. At the beginning of compression, 102 kPa, and 300 K....
Consider a cold air-standard Diesel cycle. At the beginning of compression, 102 kPa, and 300 K. The mass of air is 0.120 kg, the compression ratio is 16, and the cut-off ratio is 2.0 For a cold air-standard analysis use the following values: cp = 1.005 kJ/kgK, cv = 0.718 kJ/kgK, k=1.40, M=28.97 kg/kmol. Determine the following : (a) pressure at end of compression stroke, in kPa (b) temperature at end of compression stroke, in K (c) maximum temperature in...
Use cold-air-standard analysis with the fluid modeled as an ideal gas with R=0.287 kJ/kg-K and constant...
Use cold-air-standard analysis with the fluid modeled as an ideal gas with R=0.287 kJ/kg-K and constant k=1.4. Neglect changes in kinetic and potential energy. Consider a SSSF of air at 300 K and 100 kPa entering the compressor of a Simple Brayton Cycle Gas Turbine powerplant. The cycle pressure ratio is 40 and maximum cycle temperature is 1800 K. For compressor isentropic efficiency of 82% the compressor work input per unit mass = __ kJ/kg (enter the nearest positive integer...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT