Question

Room air at 20°C DBT and 60% RH is mixed with outdoor air at 40°C DBT...

Room air at 20°C DBT and 60% RH is mixed with outdoor air at 40°C DBT and 40% RH in the ratio 4:1. The mixture is passed through a cooling coil whose temperature is maintained at 9°C and whose bypass factor is 0.25, Find the following: a) Condition of air entering the coil b) Condition of air leaving the coil c) If 250 m3 /min of air is supplied to the room, find the refrigeration load on the cooling coil

Engineering   Mechanical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

please rate the answer thanks

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The following data is available for the design of air conditioning of a small theatre: Outdoor...
The following data is available for the design of air conditioning of a small theatre: Outdoor design conditions = 34ºC DBT and 70% RH Comfort conditions required = 22ºC DBT and 50% RH Total seating capacity = 350 persons Sensible heat gain per person = 90 W Latent heat gain per person = 30 W Sensible heat due to solar gain and infiltrated air = 46.6 kW Latent heat gain due to infiltrated air = 23.3 kW Fresh air supplied...
A room is maintained at 70 DB and 60% RH. Heating air leaves the heating cooling...
A room is maintained at 70 DB and 60% RH. Heating air leaves the heating cooling coils at 85 DB and 50 RH. If 3000 cfm return air are mixed together, with 7000 cfm of heated air find the resulting dry and RH temperatures of the mixture.
An air-conditioning system with a room design 22 degrees C DBT & 50% RH has a...
An air-conditioning system with a room design 22 degrees C DBT & 50% RH has a room sensible heat 35 kW with 0.8 sensible heat factor. Determine: a. Draw the psychrometric chart indicating all parameters; room condition, SHF, room ADP & all temperatures & humidity b. Room latent heat in kW c. Room apparatus dew point d. Supply cmm of air at the room apparatus dew point. e. Supply cmm and specific humidity for a supply air 16 deg C
The design data for an air-conditioning plant of a restaurant is given below Outdoor design conditions...
The design data for an air-conditioning plant of a restaurant is given below Outdoor design conditions = 35ºC DBT and 24ºC WBT Indoor design conditions = 27ºC DBT and 55% RH Seating capacity of the restaurant = 50 Latent heat gain per person = 44 W Latent heat gain from meals per person = 6 W Sensible heat gain per person =58 W Sensible heat gain from meals per person = 3.5 W Number of service employees = 5 Latent...
An air-water vapor mixture containing 20% ​​humidity at a dry thermometer temperature of 40 ° C...
An air-water vapor mixture containing 20% ​​humidity at a dry thermometer temperature of 40 ° C A tunnel is fed to the dryer by being heated to 70 ° C. Red pepper samples It is dried in adiabatic conditions. Leave the dryer system saturated For the mixing air-water vapor mixture, find the following. a) 10000 m3 of moist air at 40 ° C (air-water vapor mixture) warmth Required heat to increase to 70 ° C b) Air temperature at dryer...
1) 20 kg/min water at 20º C is mixed adiabatically with 40 kg/min water at 80...
1) 20 kg/min water at 20º C is mixed adiabatically with 40 kg/min water at 80 ºC. What is the outlet water temperature? Select one: a. 80 °C b. 60 °C c. 50 °C d. 70 °C 2) Steam at 0.8 MPa and 500 ºC is throttled over a well insulated valve to 0.6 MPa, what is the outlet temperature Select one: a. 450 ºC b. 500 ºC c. DOF>0 d. 400 ºC 3) Humid air at 70 C and...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT