Question

Air enters a 11-m-long section of an ellipse of cross section 30 cm × 15 cm...

Air enters a 11-m-long section of an ellipse of cross section 30 cm × 15 cm made of commercial steel at an average velocity of 5 m/s. Disregarding the entrance effects, determine the fan power needed to overcome the pressure losses in this section of the channel if Reynolds number is 2000.

Homework Answers

Answer #1

please find the solution of above question below

rate me high

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Air enters a 11-m-long section of a square channel of cross section 15 cm × 15...
Air enters a 11-m-long section of a square channel of cross section 15 cm × 15 cm made of commercial steel at an average velocity of 5 m/s. Disregarding the entrance effects, determine the fan power needed to overcome the pressure losses in this section of the channel if Reynolds number is 2000. Please answer in detail, do not repost other work as it is not the same. Thank you.
AIR ENTER A 5-M-LONG SECTION OF A RECTANGULAR DUCT OF CROSS SECTION 12*18 CM MADE OF...
AIR ENTER A 5-M-LONG SECTION OF A RECTANGULAR DUCT OF CROSS SECTION 12*18 CM MADE OF COMMERCIAL STEEL AT 1 ATM AND 35ºc AT AN AVERAGE VEL OF 6M/S. DISGREGARDING THE ENTRANCE EFFECTS, DETERMINE THE FAN POWER NEEDED TO OVERCOME THE PRESSURE LOSSES IN THIS SECTION OF THE DUCT. THE PROBLEM IS VERY SIMILAR IN THE CHAP 8 PROB 43 OF THE CENGEL MECHANIC OF FLUIDS 3RD ED. I JUST WANT TO KNOW THE RESULT WITH MY DATES AND HOW...
Air flows in a duct of circular cross-section and internal diameter 1 m at 0.7 m...
Air flows in a duct of circular cross-section and internal diameter 1 m at 0.7 m s-1 . The duct enters a tee of rectangular cross-section 1 m by 0.6 m where the flow splits equally. Find the flow velocity in the outlets.
a 21.00 m steel beam with 6.00 cm x 6.000 cm cross-section is supported at opposite...
a 21.00 m steel beam with 6.00 cm x 6.000 cm cross-section is supported at opposite ends by two wires of equal length but of different composition in diameter. One wire composed of copper has a diameter of .8500 mm The other wire is made of aluminum. If the steel beam remains perfectly level find the diameter of the aluminum wire
A long 10 cm × 20 cm rectangular cross section steel bar ݇ k= 63.9 W/mK...
A long 10 cm × 20 cm rectangular cross section steel bar ݇ k= 63.9 W/mK and alpha=18.8*10^-6 m^2 /s was heated to an initial temperature of 450°C. The steel bar is allowed to cool in a room with a temperature of 25°C and convection heat transfer coefficient of 25 W/m^2 K. The bottom surface of the bar is insulated while the other surfaces are exposed to convection. With a uniform nodal spacing of 5 cm, determine the duration required...
An 8-m-long, uninsulated square duct of cross section 0.2 m X 0.2 m and relative roughness...
An 8-m-long, uninsulated square duct of cross section 0.2 m X 0.2 m and relative roughness 10-3 passes through the attic space of a house. Hot air enters the duct at 1 atm and 100oC at a volume flow rate of 0.15 m3/s. The duct surface is nearly isothermal at 60oC. Determine the rate of heat loss from the duct to the attic space and the pressure difference between the inlet and outlet sections of the duct. Evaluate air properties...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
Delta airlines case study Global strategy. Describe the current global strategy and provide evidence about how...
Delta airlines case study Global strategy. Describe the current global strategy and provide evidence about how the firms resources incompetencies support the given pressures regarding costs and local responsiveness. Describe entry modes have they usually used, and whether they are appropriate for the given strategy. Any key issues in their global strategy? casestudy: Atlanta, June 17, 2014. Sea of Delta employees and their families swarmed between food trucks, amusement park booths, and entertainment venues that were scattered throughout what would...
What tools could AA leaders have used to increase their awareness of internal and external issues?...
What tools could AA leaders have used to increase their awareness of internal and external issues? ???ALASKA AIRLINES: NAVIGATING CHANGE In the autumn of 2007, Alaska Airlines executives adjourned at the end of a long and stressful day in the midst of a multi-day strategic planning session. Most headed outside to relax, unwind and enjoy a bonfire on the shore of Semiahmoo Spit, outside the meeting venue in Blaine, a seaport town in northwest Washington state. Meanwhile, several members of...
What role could the governance of ethics have played if it had been in existence in...
What role could the governance of ethics have played if it had been in existence in the organization? Assess the leadership of Enron from an ethical perspective. THE FALL OF ENRON: A STAKEHOLDER FAILURE Once upon a time, there was a gleaming headquarters office tower in Houston, with a giant tilted "£"' in front, slowly revolving in the Texas sun. The Enron Corporation, which once ranked among the top Fortune 500 companies, collapsed in 2001 under a mountain of debt...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT