Question

A wind turbine has blades 50m in diameter and an overall height of 125m. If it...

A wind turbine has blades 50m in diameter and an overall height of 125m. If it has four blades instead of three, create four equations modelling the height of a point on the tip for each of the four blades.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A wind turbine has a total height of 50m, with 3 equally spaced blades that are...
A wind turbine has a total height of 50m, with 3 equally spaced blades that are 16m in diameter. 1) Create equations modelling the height of points on the tips of blades One, Two and Three. Graph these three curves on one graph. 2) Maintenance can only be done on the blades when the points on blades Two and Three are at the same height. Identify the rotation angles when this would occur as well as the height of the...
There is a wind turbine that has three propeller blades (can be approximated as thin rods)...
There is a wind turbine that has three propeller blades (can be approximated as thin rods) that are 10.0kg in mass and 4.00m in length. The generator is not hooked up, so the blades can move freely. This means the only torque on the blades comes from the wind. The wind starts up and the blades go from rest to 3.00rad/s. a. What is the angular acceleration of the turbine blades? b. What is the moment of inertia (I) of...
Wind turbine B has blades twice as long as wind turbine A. If they are subjected...
Wind turbine B has blades twice as long as wind turbine A. If they are subjected to the same wind, what is the relationship between the power from turbine A (PA) and the power from turbine B (PB)?
An industrial wind turbine has blades that are 35 m long. On a 20?C day, wind...
An industrial wind turbine has blades that are 35 m long. On a 20?C day, wind at atmospheric pressure blows with a velocity of 12 m/s , and wind in the turbine wake only has a velocity of 11 m/s . (a) Will the turbine’s wake have a smaller, larger, or the same cross-sectional area compared to the area the blades sweep out. Why? Calculate this area. Hint: At velocities much lower than the speed of sound, with small pressure...
A wind turbine that is 80 feet in diameter has a steady wind of 30 mph...
A wind turbine that is 80 feet in diameter has a steady wind of 30 mph (miles per hour) blowing into it. The efficiency of the turbine in converting wind energy to electricity is 40%. If the mass density of air is 0.075 lbm/ft3 answer the following questions. You did watch the video lectures ...right? What is the actual power output of the turbine in horsepower to three significant digits ______________? Do not type in units, do not forget efficiency....
A newly-designed vertical axis wind turbine with a diameter of D=1.25 m spins the air around...
A newly-designed vertical axis wind turbine with a diameter of D=1.25 m spins the air around with a tangential velocity (in polar coordinate system) of Vo=(1/π)Dω at its tip, where ω is the angular velocity of the turbine. a) Calculate the circulation for this turbine when it rotates at N=65 rpm in a field that air pressure and temperature are 101250 Pa and 7 oC, respectively. b) If the turbine height is H=8 m, find the lift force produced by...
There is a wind turbine close to Lubbock. The turbine capacity is 3 MW, the rotor...
There is a wind turbine close to Lubbock. The turbine capacity is 3 MW, the rotor diameter is 90 meter, and tower height is 110 meter. The Cp is 43.7%.The local met tower has 3 cup anemometer at 10 meter height. The yearly average wind speed at 10 m is 6.1 m/s. How much energy can you produce with the given turbine setup in 3 years at hub height in Lubbock? (Answer in MW)
A wind turbine has a radius of 30 m, a moment of inertia of 9.0 ×...
A wind turbine has a radius of 30 m, a moment of inertia of 9.0 × 106kg⋅m2, and rotates with an initial angular speed of 2.0 rad/s. When the wind speed increases, the turbine experiences a net torque of 1.6× 105N⋅m. What is the linear speed of the tips of the turbine blades 27 s after the acceleration begins?
A wind turbine has 3 wings, each 50.0 m long from the central shaft to the...
A wind turbine has 3 wings, each 50.0 m long from the central shaft to the wing tip. The turbine is rotated at 35 rev/minutes. a. What is the linear speed of the wing tip, in m/s? b. What is the radial acceleration of the wing tip expressed in units of the gravitational acceleration, g?
A turbine disk with 24 blades has a combined mass of 30 kg and a combined...
A turbine disk with 24 blades has a combined mass of 30 kg and a combined centroidal radius of gyration of 175 mm. The turbine is rotating clockwise at a constant rate of 60 rpm when one of the blades (point A) becomes loose and is thrown off. Each blade has a mass of 51 grams. Neglecting friction, determine the change in the angular velocity of the turbine disk after it has rotated through (a) 90 ̋, (b) 270 ̋....