Question

A vertical dam at the end of a reservoir is in the form of an isosceles...

  1. A vertical dam at the end of a reservoir is in the form of an isosceles trapezoid: 100 m across at the surface of the water, 60 m across at the bottom. Given that the reservoir is 10 m deep, calculate the force of the water on the dam.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A dam is inclined at an angle of 30° from the vertical and has the shape...
A dam is inclined at an angle of 30° from the vertical and has the shape of an isosceles trapezoid 200 ft wide at the top and 100 ft wide at the bottom and with a slant height of 140 ft. Find the hydrostatic force on the dam when it is full of water. (Round your answer to the nearest whole number. Recall that the weight density of water is 62.5 lb/ft3.)
A dam is inclined at an angle of 30° from the vertical and has the shape...
A dam is inclined at an angle of 30° from the vertical and has the shape of an isosceles trapezoid 160 ft wide at the top and 80 ft wide at the bottom and with a slant height of 110 ft. Find the hydrostatic force on the dam when it is full of water. (Round your answer to the nearest whole number. Recall that the weight density of water is 62.5 lb/ft3.)
A dam has a shape of a trapezoid. The height is 30 m and the width...
A dam has a shape of a trapezoid. The height is 30 m and the width is 60 m at the top and 40 m at the bottom. Find the force on the dam due to hydrostatic pressure if the water level is 5 m from the top of the dam.
Water from a reservoir passes over a dam through a turbine and discharges from a 70-cm...
Water from a reservoir passes over a dam through a turbine and discharges from a 70-cm ID pipe at a point 65 m below the reservoir surface. The turbine delivers 0.80 MW. Calculate the required flow rate of water in m3 /min if friction is neglected.
A water trough is 10 m long and has a cross-section in the shape of an...
A water trough is 10 m long and has a cross-section in the shape of an isosceles trapezoid that is 40 cm wide at the bottom, 100 cm wide at the top, and has height 60 cm. If the trough is being filled with water at the rate of 0.2 m3/min how fast is the water level rising when the water is 30 cm deep?
A) A reservoir behind a dam is 60 m deep. What is the gauge pressure at...
A) A reservoir behind a dam is 60 m deep. What is the gauge pressure at the base of the dam? The acceleration of gravity is 9.8 m/s 2 and atmospheric pressure is 10100 Pa . Answer in units of kPa. 007 (part 2 of 2) 1.0 points What is the gauge pressure 19 m from the top of the dam? Answer in units of kPa. 008 (part 1 of 2) 1.0 points A very powerful vacuum cleaner has a...
A water trough is 6 m long and has a cross-section in the shape of an...
A water trough is 6 m long and has a cross-section in the shape of an isosceles trapezoid that is 20 cm wide at the bottom, 80 cm wide at the top, and has height 60 cm. If the trough is being filled with water at the rate of 0.2 m3/min how fast is the water level rising when the water is 20 cm deep? __________m/min
A vertical dam has a semicircular gate as shown in the figure. The total depth d...
A vertical dam has a semicircular gate as shown in the figure. The total depth d of the figure is 42 m, the height h of air above the water level is 6 m, and the width w of the gate is 8 m. Find the hydrostatic force against the gate. (Round your answer to the nearest whole number. Use 9.8 m/s2 for the acceleration due to gravity. Recall that the weight density of water is 1000 kg/m3.)
A gate in an irrigation canal is constructed in the form of a trapezoid 2 m...
A gate in an irrigation canal is constructed in the form of a trapezoid 2 m wide at the bottom, 38 m wide at the top, and 2 m high. It is placed vertically in the canal so that the water just covers the gate. Find the hydrostatic force on one side of the gate. Note that your answer should be in Newtons, and use g = 9.8 m/s2.
A gate in an irrigation canal is constructed in the form of a trapezoid 7 m...
A gate in an irrigation canal is constructed in the form of a trapezoid 7 m wide at the bottom, 19 m wide at the top, and 2 m high. It is placed vertically in the canal so that the water just covers the gate. Find the hydrostatic force on one side of the gate. Note that your answer should be in Newtons, and use g = 9.8 m/s2.