Question

If a spherical tank 6 m in diameter can be filled with a liquid for ​$950​,...

If a spherical tank 6 m in diameter can be filled with a liquid for ​$950​, find the cost to fill a tank 18 m in diameter.

The cost to fill the 18m tank is

Math   Geometry   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1


0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A conical tank of diameter 6 m and height 10 m is filled with water. Compute...
A conical tank of diameter 6 m and height 10 m is filled with water. Compute for the work needed to pump all the water 2 m above the tank. The water has a density of 1000 kg per cubic meter.
An open cylindrical tank with diameter of 3 ft is filled with a liquid to 1...
An open cylindrical tank with diameter of 3 ft is filled with a liquid to 1 ft depth when the tank is stationary. The tank is rotated about its centerline, causing the water level to drop in the center and rise towards the walls of the tank. Calculate a.the angular velocity in rpm at which the tank bottom will first be exposed andb.the maximum water height in ft in the tank at this velocity.
A storage tank has a Diameter of 6 m and a height of 3 m. The...
A storage tank has a Diameter of 6 m and a height of 3 m. The output volumetric flow from this tank is given by fout(t)=2h(t) where h(t) is the height of the liquid in the tank. At a particular time the tank is at steady state with an input flow of 275 L/min . 1) develope the mathematical model describing this process.Define all variables and give initial conditions where appropriate. Clearly state all assumptions that you used to develope...
A spherical tank of radius 4 ft is being filled with water at the hole in...
A spherical tank of radius 4 ft is being filled with water at the hole in the base. How much work is required to fill the tank with water through a hole in the base when the water source is at the base? (The weight-density of water is 62.4 pounds per cubic foot.)
A spherical balloon with a diameter of 8.2 m is filled with helium at 24.6°C and...
A spherical balloon with a diameter of 8.2 m is filled with helium at 24.6°C and 209 kPa. Determine the mole number and the mass of the helium in the balloon
A tank is filled with liquid of density 1000 [kg/m3 ]. Its shape is obtained by...
A tank is filled with liquid of density 1000 [kg/m3 ]. Its shape is obtained by rotating the curve y =√x, 0 ≤ x ≤ 4, around the y-axis. Find the work that is required to pump all the liquid out of the tank, from the top of the tank. All the lengths are in units of meter [m]. Do not forget to use gravitational constant g = 9.8[m/s2 ].
An open cylindrical tank 1.20 m. in diameter and 1.80 m. deep is filled with water...
An open cylindrical tank 1.20 m. in diameter and 1.80 m. deep is filled with water and rotated about its vertical axis at 60 rpm If the container was suddenly stopped after rotating at 60 rpm, what will be the water level (in meters) in the tank?
A spherical tank, 1.5 m in diameter, is maintained at a temperature of 120 ◦C and...
A spherical tank, 1.5 m in diameter, is maintained at a temperature of 120 ◦C and exposed to a convection environment with heat transfer coefficient, h=15 W/m2 ◦C and T∞ =20 ◦C. For the same surface temperature of the tank, it is desired to insulate the tank in order to decrease the heat loss by 45 percent, determine the thickness of insulation layer (k=0.2 W/m ◦C ) and the outer surface temperature.
a tank is 0.6 in diameter and 3.9m high. the tank is filled with a light...
a tank is 0.6 in diameter and 3.9m high. the tank is filled with a light hydraulic oil and has a valve in its base. if the valve has a diameter of 0.114mm and assuming no losses in this system, calculate how quickly the tank would empty if the tank was originally 75% filled with the light oil. the density of light oil is 770kg/m3
A 70 m diameter tank will be filled with 9 m of water. The site consists...
A 70 m diameter tank will be filled with 9 m of water. The site consists of 20 m of sand overlying 20 m of clay, overlying another layer of sand. The water table is located at a depth of 10 m. The unit weights of the sand layers are 18 kN/m3 and the unit weight of the clay is 16 kN/m3. Other clay properties are given in Table 1. Please divide the clay layer into 4 or more sublayers...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT