Question

A dc-dc converter is needed to provide power for a video camera pack from an automobile....

A dc-dc converter is needed to provide power for a video camera pack from an automobile. In normal operation, the car electrical system varies between 10 V and 15 V. The video camera requires an accurate 10.2 V supply for proper operation and battery charging. The power level is 20 W. Isolation is recommended to avoid any issues about ground connections. At this power level, a switching frequency of 200 kHz should be feasible. Draw a circuit that can perform the desired function. What duty ratio range is needed for 10.2 V output? Choose inductor and capacitor values to limit the output ripple to 80 mV peak-to-peak.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A dc-dc converter is needed to provide power for a video camera pack from an automobile....
A dc-dc converter is needed to provide power for a video camera pack from an automobile. In normal operation, the car electrical system varies between 10 V and 15 V. The video camera requires an accurate 10.2 V supply for proper operation and battery charging. The power level is 20 W. Isolation is recommended to avoid any issues about ground connections. At this power level, a switching frequency of 200 kHz should be feasible. Draw a circuit that can perform...
Design a Boost Converter with the following characteristics: Vg = 100V, V = 200V, load power...
Design a Boost Converter with the following characteristics: Vg = 100V, V = 200V, load power 800W, switching frequency 100 kHz. For the design consider all elements to be ideal. 1) What is the duty cycle, D? 2) What is the inductor average current, IL? 3) Design the inductor and capacitor so that the peak-to-peak inductor current ripple is 40% of IL and the capacitor peak-to-peak voltage ripple is 2.5 % of V. 4) Draw the waveforms of voltage and...
Problem 2: A photovoltaic module is used to supply constant 12 V that needed by a...
Problem 2: A photovoltaic module is used to supply constant 12 V that needed by a Tablet. Depending on insolation from the Sun, the photovoltaic module’s output voltage is changing between 18 V to 36 V (dc). Thus, a buck converter is used between the netbook and the photovoltaic module. 1) What is the duty ratio range of the dc/dc converter? 2) If the inductance of the buck converter inductor is 40 uH, what is the minimum switching frequency to...
A buck converter has an input voltage V in = 24 V, switching frequency f s...
A buck converter has an input voltage V in = 24 V, switching frequency f s = 100 kHz, duty ratio d = 50%, load resistance R L = 10 Ω , inductance 100 μH, and capacitance 680 μF. 1) Calculate the following values, and include units in your answers : a) Average output voltage, V_o b) Average output current, I_o c) Peak - to - peak current ripple, Δi_L d) Output current that will cause the converter to enter...
A buck-boost converter has an input voltage V_in= 10 V, switching frequency fs= 100 kHz, duty...
A buck-boost converter has an input voltage V_in= 10 V, switching frequency fs= 100 kHz, duty ratio d= 30%, load resistance R_L= 20Ω, inductance =100 μH, and capacitance= 680 μF. 1) Calculate the following values, and include units in your answers: a) Average output voltage,V_o b) Average output current,I_o c) Average input current,I_in d) Average current through the inductor in steady-state e) Peak-to-peak current ripple through the inductor, Δ_iL f) Average inductor current that will cause the converter to enter...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT