Question

A PMDC motor has a stall torque of 0.1N-m and draws 2 amps at 12V at...

A PMDC motor has a stall torque of 0.1N-m and draws 2 amps at 12V at stall. What is the no load speed in RPM when 12 V is applied?
Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
you are given a motor operated by a 9V battery. The stall torque for this motor...
you are given a motor operated by a 9V battery. The stall torque for this motor is  Ts = 0.04 N-m, and its no-load speed, wnl = 2200  rpm. You are given a 10-tooth gear, a 20-tooth gear, and a bunch of axles (shafts). Draw below how will you connect the gears and shafts so that output shaft has a higher torque than the motor shaft. Label in your diagram, which gear is the input (driver), and which is the output (driven).   ...
A motor is needed to drive a load requiring a torque of 3 kgf-cm. The motor...
A motor is needed to drive a load requiring a torque of 3 kgf-cm. The motor that is readily available has a stall torque of 23 kgf-cm and a no-load speed of 4500 rpm. At what speed would you estimate that this motor would drive the load?
A 230 V, 250 rpm, 100 A separately excited dc motor has an armature resistance of...
A 230 V, 250 rpm, 100 A separately excited dc motor has an armature resistance of 0.5 Ω. The motor is connected to 230 V dc supply and rated dc voltage is applied the field winding. It is driving a load whose torque-speed characteristic is given by TL = 500 − 10ω where ω is the speed in rad/sec and TL is the load torque in N-m. Find (a) the steady state speed at which the motor will drive the...
A 25-hp, 240V, DC shunt motor has armature and field resistances of 0.2 ? and 120...
A 25-hp, 240V, DC shunt motor has armature and field resistances of 0.2 ? and 120 ?, respectively. At no load and rated voltage, the motor draws a line current of 5A and its speed is 1250 rpm. When driving a certain load, the input to the motor is 15KW. For this condition, find: a.The speed of the motor b.The developed torque The efficiency of the motor at this load
A 3-phase 50Hz 2-pole 440V (L-L rms) induction motor drive has a rated speed of 2955...
A 3-phase 50Hz 2-pole 440V (L-L rms) induction motor drive has a rated speed of 2955 rpm and rated torque of 35 Nm. This motor drives a load with a torque characteristic that increases linearly with speed such that it equals the load torque at the rated speed. It draws a current of 3.0 A(rms) per phase at the rated voltage at a power factor of 0.81 (lagging). The stator resistance Rs = {r_s} ohms. At the rated operating speed,...
A 200 V DC, 1,800 RPM shunt connected motor has an armature resistance of 0.4 ohm...
A 200 V DC, 1,800 RPM shunt connected motor has an armature resistance of 0.4 ohm and a brush resistance of 0.4 ohm; brush voltage drop of 6.0 V, independent of load. The resistance of the shunt field is 230 ohm. The full load rated line current is 40 A. When the motor is operated at no load the line current is 5 A and the speed is 1750 RPM. Calculate speed at rated load Calculate speed at .3 rated...
A 230-V DC shunt motor has armature circuit resistance of 0.25 ? and field circuit resistance...
A 230-V DC shunt motor has armature circuit resistance of 0.25 ? and field circuit resistance of 115 ?. At full load armature draws a current of 38 A and the speed is measured at 1050 rpm. Find the developed torque. The field rheostat is now changed so that total field resistance is 144 ?. Find the speed under this condition. Assume that the armature current does not change. Assuming the rotational losses amount to 600 W, find the efficiency...
An 800 rpm, 500 V, 120 A (armature current), series motor has a field resistance of...
An 800 rpm, 500 V, 120 A (armature current), series motor has a field resistance of 0,04 Ω and an armature resistance of 0.11 Ω. Determine the speed of the motor: 2.1 For a supply voltage of 550 V and a current of 60 A. (9) 2.2 For a torque of 50% of full-load, a supply voltage of 500 V and a diverter across the field of 0.08 Ω. (11) 2.3 With a resistance of 1 Ω in series with...
A 100 hp, 250 V, 1200 rpm DC shunt motor with an armature resistance of 0.03...
A 100 hp, 250 V, 1200 rpm DC shunt motor with an armature resistance of 0.03 ? and a field resistance of 41.67 ?. The motor has compensating windings, so armature reactance can be ignored. Mechanical and core losses may be ignored also. The motor is driving a load with a line current of 126 A and an initial speed of 1103 rpm. The magnetization curve is shown in the following figure. 1. What is the motor speed if the...
A 20kW. 3-phase, +40 V. 4 pole, delta-connected permanent magnet synchronous motor has following parameters Xs=5...
A 20kW. 3-phase, +40 V. 4 pole, delta-connected permanent magnet synchronous motor has following parameters Xs=5 ohm, Rs negligible  rated power factor = 1.0. Machine is controlled by variable frequency control at a constant (V/f) ratio. Calculate (i) Armature current. torque angle and power factor at half full load torque and 750 rpm. (ii) armature current, torque angle and power factor at half full load torque and 1000 rpm. (iii) The braking torque, torque angle and power factor when working under...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT