Question

The resistance of a coil is measured by the ammeter–voltmeter method. With the voltmeter connected across...

The resistance of a coil is measured by the ammeter–voltmeter method. With the voltmeter connected across the coil, the readings on the ammeter and voltmeter are 0.4 A and 3.2 V respectively. The resistance of the voltmeter is 500 Ω. Calculate: (a) the true value of the resistance; (b) the percentage error in the value of the resistance if the voltmeter current were neglected.
Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An ammeter with resistance 1.42 Ω is connected momentarily across a battery, and the meter reads...
An ammeter with resistance 1.42 Ω is connected momentarily across a battery, and the meter reads 9.78 A. When the measurement is repeated with a 2.11@Ω meter, the reading is 7.46 A. Find (a) the battery voltage and (b) its internal resistance.
Two scales on a voltmeter measure voltages up to 20.2 and 30.2 V, respectively. The resistance...
Two scales on a voltmeter measure voltages up to 20.2 and 30.2 V, respectively. The resistance connected in series with the galvanometer is 1530Ω for the 20.2-V scale and 3090Ω for the 30.2-V scale. Determine (a) the coil resistance and (b) the full-scale current of the galvanometer that is used in the voltmeter.
1. A) A 13-Ω coffee maker and a 16-Ω frying pan are connected in series across...
1. A) A 13-Ω coffee maker and a 16-Ω frying pan are connected in series across a 120-V source of voltage. A 25 Ω bread maker is also connected across the 120-V source and is in parallel with the series combination. Find the total current supplied by the source of voltage. B) A new "D" battery has an emf of 1.5 V. When a wire of negligible resistance is connected between the terminals of the battery, a current of 25...
A coil with a self-inductance of 4 H and a resistance of 10 is connected across...
A coil with a self-inductance of 4 H and a resistance of 10 is connected across a 25 V battery of negligible internal resistance. (a) What is the final current? ____________A (b) How much energy is stored in the inductor when the final current is attained? ____________J
A nonideal ammeter that has an internal resistance of 0.303 ? is connected in series with...
A nonideal ammeter that has an internal resistance of 0.303 ? is connected in series with a 3.00-V battery and a 40.0-? resistor. By what percentage does the presence of the ammeter change the current measurement? Iammeter?I0/I0 =
A coil with an inductance 0.14 H and a resistance of 12 ohm is connected across...
A coil with an inductance 0.14 H and a resistance of 12 ohm is connected across a 110 V, 25 Hz source. Compute the current in the coil and the phase angle between the current and supply voltage. Group of answer choices 20 mA, 13o 4.4 A, 61.3o 2.2 A, 22o 71 mA, 50o
a) A student measured the voltage across and current through an aluminum wire using a voltmeter...
a) A student measured the voltage across and current through an aluminum wire using a voltmeter and ammeter. The power supply was a battery. Sketch the circuit and how the student attached the meters to make her measurements. b) Here is the student's data: (0, 0), (1.01, 0.35), (1.49, 0.80), (2.67, 1.10), (3.00, 1.35). Each datum is given as a (volts, amps) pair. Make a scatter plot of current versus voltage. Label your axes appropriately. Find the best estimate of...
An ac voltage source is connected across a series circuit abcd consisting of a resistor between...
An ac voltage source is connected across a series circuit abcd consisting of a resistor between a and b of 12.6 Ω, a variable capacitor between b and c of 64μF and a coil between c and d of 84 mH and a resistance of 8.4 Ω. The voltage measured across the circuit after 0.8932 ms is 94 V at 50 Hz.
1- A moving coil instrument has a resistance of 2 ohms(Rm) and its reads upto 250Volts(full...
1- A moving coil instrument has a resistance of 2 ohms(Rm) and its reads upto 250Volts(full scale reading )when a resistance of 5000 ohms is connected in series with it. Find the current range of the instrument ( Im + Is) when it is used as an ammeter with the coil connected across a shunt resistance of 2 milli ohms(Rs). 2- - In the bridge shown below, the null detector is a 1 mA, 50 , 100 divisions galvanometer. The...
A coil has an inductance of 1.5 H and a resistance of 0.6 ohm. If the...
A coil has an inductance of 1.5 H and a resistance of 0.6 ohm. If the coil is suddenly connected across a 12-V battery, find the time required for the current to rise to 0.63 of its final value. What will be the final current?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT