Question

Draw the harmonic current waveform and harmonic order for current drawn by an adjustable speed motor...

Draw the harmonic current waveform and harmonic order for current drawn by an adjustable speed motor drive.

Homework Answers

Answer #1

The speed of motor drive is controlled by the combination of rectifier and the inverter. The combination of the rectifier and the inverter is used to change the frequency of the AC signal. But some harmonic content is entered in the current flowing in motor drive. This harmonic content cause motor not to rotate smoothly which will damage the motor drive. For removing the harmonic content, there are capacitor and inductor is used in the circuit of the rectifier and the inverter.

The distortion of the current will be 30-40% compared to the 70-100% of a drive with no reactor.

Draw the current waveform for the 6-pulse inverter,

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Draw the speed-torque characteristics of a DC shunt motor. Write the expression for speed torque relation
Draw the speed-torque characteristics of a DC shunt motor. Write the expression for speed torque relation
Draw the circuit diagram of a motor drive that controls DC motor only in two quadrants
Draw the circuit diagram of a motor drive that controls DC motor only in two quadrants
Calculate the input current of an induction motor if the motor speed is 1720 rpm. Use...
Calculate the input current of an induction motor if the motor speed is 1720 rpm. Use the 60 Hz four-pole, 480V motor data per phase are: Vm: =480V , Rm: = 65ohms , Xm: = 35ohms , P:= 4 Rsta: = 0.1ohms , Xsta = 0.35 ohms , Rrot = 0.125ohms , Xrot = 0.4ohms
How does the homopolar motor work? Draw a diagram to illustrate the direction of current flow,...
How does the homopolar motor work? Draw a diagram to illustrate the direction of current flow, magnetic fields, and the force on the wire. Explain why it is not necessary to switch the polarity of current (hence “homopolar”) on this motor.
Design of DC Motor Starter In order for a dc motor to function properly, it must...
Design of DC Motor Starter In order for a dc motor to function properly, it must be protected from physical damage during the starting period. At starting conditions, the motor is not rotating, and armature generated voltage EA = 0 V. Since the internal resistance of a normal DC motor is very low, a very high current flows. It is possible for a motor to be severely damaged by such currents, even if they last for only a moment. A...
Design of DC Motor Starter In order for a dc motor to function properly, it must...
Design of DC Motor Starter In order for a dc motor to function properly, it must be protected from physical damage during the starting period. At starting conditions, the motor is not rotating, and armature generated voltage EA = 0 V. Since the internal resistance of a normal DC motor is very low, a very high current flows. It is possible for a motor to be severely damaged by such currents, even if they last for only a moment. A...
Q8) What happens if the drive- motor speed decreases to 1200 rpm?
Q8) What happens if the drive- motor speed decreases to 1200 rpm?
In order for a dc motor to function properly, it must be protected from physical damage...
In order for a dc motor to function properly, it must be protected from physical damage during the starting period. At starting conditions, the motor is not rotating, and armature generated voltage EA = 0 V. Since the internal resistance of a normal DC motor is very low, a very high current flows. It is possible for a motor to be severely damaged by such currents, even if they last for only a moment. A solution to the problem of...
A 3-phase 50Hz 2-pole 440V (L-L rms) induction motor drive has a rated speed of 2955...
A 3-phase 50Hz 2-pole 440V (L-L rms) induction motor drive has a rated speed of 2955 rpm and rated torque of 35 Nm. This motor drives a load with a torque characteristic that increases linearly with speed such that it equals the load torque at the rated speed. It draws a current of 3.0 A(rms) per phase at the rated voltage at a power factor of 0.81 (lagging). The stator resistance Rs = {r_s} ohms. At the rated operating speed,...
Applications: Which motor would be best suited for the following applications 1.A lathe motor, requires constant...
Applications: Which motor would be best suited for the following applications 1.A lathe motor, requires constant speed when the cutting tool is applied to the work piece 2.An electric train, which requires large torque to accelerate a large inertia (lowspeed) but only a small torque once the load is moving (high speed). 3.A sheet metal punch press drive, requires a large drop in speed when punching action takes place (in order to provide its rotational kinetic energy to the load)...