Question

4-bit register using jk flip flops. 1)What is the purpose of anding the clock signal and...

4-bit register using jk flip flops.

1)What is the purpose of anding the clock signal and the load input together in your circuit?
2) How would I be able to store 1011 into the 4-bit register? Explain the process. For example, what do your inputs should be? Should your clock be on or off? How about your load input? How does your load input work when you want to store bits into your register?
3) If your load input is off, can your stored value change? Explain.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Design a 6-bit, shift-right register with D flip flops, and use it to implement a circuit...
Design a 6-bit, shift-right register with D flip flops, and use it to implement a circuit that detects the sequence “010010” (the rightmost bit is the first arriving). Information shifts one position right when a positiv edge of clk occurs The circuit has the following inputs and outputs (use exactly these names for inputs and outputs. Respect upper and lower case): clk: Input. Clock signal. RST: Reset signal. When RST = 1 flip flops are reset to 0. IN: Data...
Draw a 4 way logic light controller circuit using JK flip flops or D flip flops....
Draw a 4 way logic light controller circuit using JK flip flops or D flip flops. Design the full logic description including state truth table, output signal truth table.
Design the following state machine using JK flip-flops: A state machine outputs a 1 when the...
Design the following state machine using JK flip-flops: A state machine outputs a 1 when the sequence 010110 is recognized and your design must accommodate overlaps. When the sequence is detected, the sequence is detected, the sequence detection must be signaled immediately when the last bit in the sequence is input. Derive the K-maps for all excitation inputs.
Using T-Flip-flops, design a 3-bit register/counter circuit with bits [A2 A1 A0]. The circuit operations are...
Using T-Flip-flops, design a 3-bit register/counter circuit with bits [A2 A1 A0]. The circuit operations are described in the following table. Show all design details, i.e., write down steps and equations and draw the detailed circuit diagram. S2 S1 S0 Operation 0 0 0 No change 0 0 1 Rotate left 0 1 0 Rotate right 0 1 1 Reset 1 0 0 Set 1 0 1 Count down 1 1 0 Count up 1 1 1 Load external bits...
Design a 4-bit bidirectional shift register using JK Flip-Flop which is capable of storing data in...
Design a 4-bit bidirectional shift register using JK Flip-Flop which is capable of storing data in both serial and parallel fashion but produces output in parallel fashion only without the refreshing facility. Explain the working with the help of timing diagram.                                                                                                                                                          
Multisim A Shift Register is a series of flip-flops connected so that data can be transferred...
Multisim A Shift Register is a series of flip-flops connected so that data can be transferred to a neighbor each time the clock pulse is active. These shift registers can be constructed using D or J-K flip-flops. A shift register counter is a shift register with the serial output connected back to the serial input to produce special sequences. Two of the most common shift register counters are the Johnson Counter [Twisted Ring Counter] and the Ring Counter [Overbeck Counter]....
Multisim Please A Shift Register is a series of flip-flops connected so that data can be...
Multisim Please A Shift Register is a series of flip-flops connected so that data can be transferred to a neighbor each time the clock pulse is active. These shift registers can be constructed using D or J-K flip-flops. A shift register counter is a shift register with the serial output connected back to the serial input to produce special sequences. Two of the most common shift register counters are the Johnson Counter [Twisted Ring Counter] and the Ring Counter [Overbeck...
QUESTION 1 During a single clock tick, how many 64-bit values can be written to an...
QUESTION 1 During a single clock tick, how many 64-bit values can be written to an input of a register file with 8 64-bit registers (i.e. an 8x64 register file)? QUESTION 2 Suppose you are designing a processor that contains a register file with 32 32-bit registers (i.e. a 32x32 register file). What is the minimum number of bits required in order to select which register is being written to? QUESTION 3 If the decimal value, 30, is shifted to...
In long-distance digital phone transmissions, the information travels in series (bit by bit) over the telephone...
In long-distance digital phone transmissions, the information travels in series (bit by bit) over the telephone network and is clocked at the rate of a clock. When transmitting this information, it can happen that long sequences of ’1’ are sent. Therefore, they can show a DC component on the line (twisted pair, coaxial cable) that may be filtered by the installation (presence of transformer). To avoid such filtering, the natural binary code is transformed into AMI (Alternate Mark Inversion) code....
1. The memory units that follow are specified by the number of words times the number...
1. The memory units that follow are specified by the number of words times the number of bits per word. How many address lines and input/output data lines are needed in each case? (a) 8K X 16 (b) 2G X 8 (c) 16M X 32 (d) 256K X 64 2. Give the number of bytes stored in each memory unit in question 1. 3. Word number 563 decimal in the memory shown in Fig. 7.3 (see Mano-Ch7.pdf) contains the binary...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT