Question

A motor draws 12A rms from 210 V rms, a 60 hz ac source at 0.85...

A motor draws 12A rms from 210 V rms, a 60 hz ac source at 0.85 pf lagging. If a capacitor is connected to make the power factor unity, the approximate capacitance of the capacitor will be:

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Two AC loads connected in parallel draw power from a 60 Hz, 120-Vrms source. Load 1...
Two AC loads connected in parallel draw power from a 60 Hz, 120-Vrms source. Load 1 draws 350 W at a lagging power factor of 0.7. Load 2 draws 500 VA at a leading power factor of 0.5. a. (5) Calculate the effective (rms magnitude) current drawn by load 1. b. (10) Calculate the impedance of Load 1. c. (5) Calculate the total complex power drawn by both loads combined. d. (5) Determine the PF of the combined load. Specify...
A full-wave rectifier has a 120 V rms, 60 Hz ac source. The load is a...
A full-wave rectifier has a 120 V rms, 60 Hz ac source. The load is a series inductance, resistance and dc voltage source, with L = 100 mH, R = 10 Ω, and Vdc = 50 V. a). Determine an expression for load current. b). Determine the power absorbed by the dc voltage source. c). Determine the power absorbed by the resistance. d). Determine the power factor of the source.
A motor attached to a 120 V/60 Hz power line draws an 8.00 A current. Its...
A motor attached to a 120 V/60 Hz power line draws an 8.00 A current. Its average energy dissipation is 850 W. How much series capacitance needs to be added to increase the power factor to 1.0?
1. A single phase circuit has a load of 500kVa at a power factor of 0.707...
1. A single phase circuit has a load of 500kVa at a power factor of 0.707 lagging. Calculate the kVA of the capacitors needed to improve the power factor to unity 3. When connected to a 120-v(rms), 60Hz power line, a load absorbes 4 kw at a lagging power factor of 0.8. Find the capacitance necessary to raise the pf to 0.9 4. A three phase motor draws 20kva at 0.707 power factor lagging from a 208V source. Determine the...
A single-phase motor takes 8.3 A at a power factor of 0.866 lagging when connected to...
A single-phase motor takes 8.3 A at a power factor of 0.866 lagging when connected to a 230 V, 50 Hz supply. Two similar capacitors are connected in parallel with each other to form a capacitance bank. This capacitance bank is now connected in parallel with the motor to raise the power factor to unity. Determine the capacitance of each capacitor
An ac generator with an rms voltage 120 V is and a frequency of 60 Hz...
An ac generator with an rms voltage 120 V is and a frequency of 60 Hz is connected with a 15 µF capacitor, and a 30 mH inductor and a resistor R.     What value must R have if the rms current in this circuit it to be 5 mA?       Calculate the rms voltage across the resistor.
Two parallel loads are connected to a 220-V, 60 Hz, single-phase source where the first load...
Two parallel loads are connected to a 220-V, 60 Hz, single-phase source where the first load consumes power 100kW at power factor 1 and the second load consumes 100kW at power factor 0.8 lagging. By placing a bank of capacitors in parallel with the load, the resultant power factor is to be raised to 0.98 lagging. (a) Find the net capacitance of the capacitor bank in µF that is required. (b) Simulate the circuit in Matlab and verify your result.
In RLC series circuit, an AC source with a rms voltage of 220 V and frequency...
In RLC series circuit, an AC source with a rms voltage of 220 V and frequency 60 Hz is connected to a resistor, a capacitor 65 µF and an inductor of inductance 185 mH. If the observed current is 4.4 A, evaluate the resistance of the resistor.
An AC source operating at 60 Hz with a maximum voltage of 173 V is connected...
An AC source operating at 60 Hz with a maximum voltage of 173 V is connected in series with a resistor (R = 1.3 k?) and a capacitor (C = 2.5
Electrical Circuit A) A factory (with frequency 60 HZ) has the following electrical loads: Induction motors   ...
Electrical Circuit A) A factory (with frequency 60 HZ) has the following electrical loads: Induction motors    of 16 kW at a lagging power factor of 0.8. Induction motors    of 20 kW at a lagging power factor of 0.7. Load of 12 KVA at a lagging factor of 0.9. Load of 10 KVAR at a leading factor of 0.8 a-what is the overall power factor of the factory. b- Assume that the voltage at the input to the factory is 440...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT