Question

A single?phase half?bridge inverter is used to power a purely inductive load of 100mH. The inverter is supplied from a dc source of 300V, and is operated at a frequency of 50Hz using square?wave modulation.

a) Determine the values of the fundamental, 3rd, 5th and 7th harmonic load current components.

b) Determine the load current THD value.

Answer #1

if you have any doubts please feel free to ask me

A single-phase full-bridge inverter supplies a load of 10 W in
series with an inductance of 31.8 mH. The inverter is supplied by a
380 VDC source.
(a) Sketch the inverter circuit as described above.
(b) Calculate the rms value of the fundamental (n = 1) of the
inverter output voltage assuming it is a square-wave.
(c) Assuming a quasi square-wave output voltage waveform with a
delay angle of 45°, calculate the rms value of the fundamental and
the two...

A single-phase full-bridge inverter has RLC load of R = 4 ? and
L = 35 mH
and C = 155 ?F. The dc input voltage is 230 V and the output
frequency is 50 Hz.
(a) Find an expression for load current up to fifth harmonic.
(b)Calculate rms value of fundamental load current
(c) The power absorbed by load and the fundamental power
(d)The rms and peak current of each IGBT
(e) Conduction time of IGBTs and diodes if...

Draw the circuit for a three-phase full-bridge non-isolated
inverter. Describe how the converter works using switching
waveforms. Include a description of two different control
strategies using PWM and square-wave phase difference methods.
Clearly define the amplitude and frequency modulation indexes in
the PWM method. Discuss and calculate the rms phase and line
voltages when the DC input voltage is 400V.

A three-phase six-step inverter delivers power to a resistive
load from a 450 V
dc source. For a star-connected load of 10 ? per phase,
determine:
(i) rms value of load current
(ii) rms value of IGBT current
(iii) Load power.

A 50 Hz single –phase inverter of 80% quasi –square waveform
output voltage
supplies a 40 mH with 8 ohm from a 200 V dc source. Plot the
relevant
waveform and find:
1- The rms voltage of the load and its components.
2- The expression of load current variation.

A single-phase motor is modeled as an R-L (resistive-inductive)
series load. The motor is rated for 220V, 4A, and 0.5hp. (746W = 1
hp) Determine the value of capacitance in a capacitor placed in
shunt (i.e., parallel) with the motor to minimize the current
provided from the 220V source at rated conditions. Then determine
the source current required to feed the combined load of the motor
and capacitor.

A single phase half wave converter in is operated from a 120 V
60 Hz supply and a freewheeling diode is connected across the load.
the load consists of series connected resistance R= 10 ohm
inductance L= 5mH and battery E=20V. Express the instantaneous
output voltage in fourirer series and determine the rms value of
the lowest order output harmonic current.

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 43 minutes ago

asked 53 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 3 hours ago

asked 3 hours ago

asked 3 hours ago

asked 3 hours ago

asked 4 hours ago