Question

Task: Design and Build a 3-to-1 MUX–4 Design a circuit that takes three different 4-bit words...

Task: Design and Build a 3-to-1 MUX–4
Design a circuit that takes three different 4-bit words and selects one to be connected to the output. In your template provide the design schematic as well as the approach you would use to test the circuit.

Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The software I am using Is Logisim. Design and build a circuit to add 2 2-bit...
The software I am using Is Logisim. Design and build a circuit to add 2 2-bit binary numbers. This means that you will have 4 input lines and 3 output lines. The three output lines are 2 bits for the sum and a carry out line. Use logisim to construct your circuit. Upload the .circ file to blackboard
It takes three 2-1 MUX's to build a 4-1 MUX. How many 2-1 MUX's does it...
It takes three 2-1 MUX's to build a 4-1 MUX. How many 2-1 MUX's does it take to build an 8-1 MUX? 4 5 6 7 none of these
Q5) Design a magnitude comparator that takes two three bit unsigned numbers, A = (a2a1a0) and...
Q5) Design a magnitude comparator that takes two three bit unsigned numbers, A = (a2a1a0) and B = (b2b1b0), and outputs LE = 1 if A<=B, otherwise LE = 0. Give the Boolean expression for the circuit output g. Draw the circuit using only 3 4x1 MUXs.(16pt)
Design a circuit for a synchronous 4-bit counter. Your counter should count up starting from 0...
Design a circuit for a synchronous 4-bit counter. Your counter should count up starting from 0 to 9 (00002 to 10012) and then wind back to 0 (00002) – after 9, it should go back to 0. Use 4 JK flip-flops and any other gates you need. Include your design documentation in your submission: a. Truth table b. Simplification (show your work) 2. Build this circuit in Logisim. Please label each gate, including flip-flops. You may need the following wiring...
Design a 6-bit, shift-right register with D flip flops, and use it to implement a circuit...
Design a 6-bit, shift-right register with D flip flops, and use it to implement a circuit that detects the sequence “010010” (the rightmost bit is the first arriving). Information shifts one position right when a positiv edge of clk occurs The circuit has the following inputs and outputs (use exactly these names for inputs and outputs. Respect upper and lower case): clk: Input. Clock signal. RST: Reset signal. When RST = 1 flip flops are reset to 0. IN: Data...
Given a binary string of zeros (0) and ones (1). You have to build a circuit...
Given a binary string of zeros (0) and ones (1). You have to build a circuit that counts the number of occurrences of string '01' within the given string. For example, given string '01000110001001', there are 4 occurrences of '01' and output have to show number of occurance each time '01' occured. Use a FSM and a counter (built from D flip-flops) to implement this circuit. It is guaranteed that the number of occurrences is not more than 31 (you...
Given a binary string of zeros (0) and ones (1). You have to build a circuit...
Given a binary string of zeros (0) and ones (1). You have to build a circuit that counts the number of occurrences of string '01' within the given string. For example, given string '01000110001001', there are 4 occurrences of '01' and output have to show number of occurance each time '01' occured. Use a FSM and a counter (built from D flip-flops) to implement this circuit. It is guaranteed that the number of occurrences is not more than 31 (you...
Given a binary string of zeros (0) and ones (1). You have to build a circuit...
Given a binary string of zeros (0) and ones (1). You have to build a circuit that counts the number of occurrences of string '01' within the given string. For example, given string '01000110001001', there are 4 occurrences of '01' and output have to show number of occurance each time '01' occured. Use a FSM and a counter (built from D flip-flops) to implement this circuit. It is guaranteed that the number of occurrences is not more than 31 (you...
Q.1.It is required to design an iterative combinational circuit that computes the equation Z=2*X-3, where X...
Q.1.It is required to design an iterative combinational circuit that computes the equation Z=2*X-3, where X is an n-bit signed number in 2’s complement representation. (Hint: -3 can be represented as -1+-1+-1 in 2’s complement representation, where -1 is represented as 111…..111). a)Determine the number of inputs and outputs needed for your 1-bit cell. Explain the meaning of values in the interface signals. b)Derive the truth table of your 1-bit cell. c) Derive minimized equations for your 1-bit using K-Map...
Design a circuit that takes three bits, X2, X1, X0 as input and produces one output,...
Design a circuit that takes three bits, X2, X1, X0 as input and produces one output, F. F is 0 if and only if 4<=X<=6 when X = (X2, X1, X0) is read as an unsigned integer.   X2 X1    Xo     F     0     0     0          0     0     1          0     1     0          0     1     1          1     0     0          1...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT