Question

what is the phase difference in phase angle between induced voltage and current in a PMSM...

what is the phase difference in phase angle between induced voltage and current in a PMSM controlled to keep maximum torque per amp?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Please introduce what is the difference between effective angle of attack,induced angle of attack and geometric...
Please introduce what is the difference between effective angle of attack,induced angle of attack and geometric angle of attack
A 3- phase, 2 pole Y-connected synchronous machines has a line-line voltage of 6,000V in 60Hz...
A 3- phase, 2 pole Y-connected synchronous machines has a line-line voltage of 6,000V in 60Hz power line, has an armature reactance of 2ohms/ phase and negligible armature resistance. Compute the following A) In case of generating action if the line current is 385 A at a leading power factor of 0.8, the armature voltage per phase is 3464V, Compute the voltage per phase and power angle. B) Draw the phasor diagram. C) If the losses in the machine is...
Induced voltage in a conductor is a function of magnetic field strength, conductor numbers and :...
Induced voltage in a conductor is a function of magnetic field strength, conductor numbers and : a) conductor cross- sectional area, b) conductor wire size, c) an external voltmeter, d) conductor speed When a current carrying wire is located in a uniform magnetic field the direction of the current the same as that of the field. a) there is a force on the wire tends to move it parallel to the field b) there is a force on the wire...
The magnitude of the phase voltage of an ideal balanced three-phase Y-connected source is 110 V...
The magnitude of the phase voltage of an ideal balanced three-phase Y-connected source is 110 V . The source is connected to a balanced Y-connected load by a distribution line that has an impedance of 0.1+0.8i Ω/ϕ . The load impedance is 20.2+14.8i Ω/ϕ . The phase sequence of the source is acb. Use the a-phase voltage of the source as the reference. Part A: Specify the magnitude and phase angle of the line current IaA. Part B: Specify the...
In an L-R-C series circuit, the welding voltage with 30 ° phase angle is in front...
In an L-R-C series circuit, the welding voltage with 30 ° phase angle is in front of the current. If the average power supplied by the source is 100 W, what is the rms voltage of the source? (? = 100 Ω)
A 210 V, 1200 rpm, 10 A separately excited motor is controlled by 1- phase fully...
A 210 V, 1200 rpm, 10 A separately excited motor is controlled by 1- phase fully controlled converter with an ac source voltage of 230 V, 50 Hz. Assume that sufficient inductance is present in the armature circuit to make to motor current continuous and ripple free for any torque greater than 25% of rated torque, and Ra = 1.5 Ω. i. What should be the value of the firing angle for the rated torque at motoring +ve (1200rpm) ii....
Explain briefly the difference between the current angle equation and the load angle equation.
Explain briefly the difference between the current angle equation and the load angle equation.
For three-phase, Full-wave, Semi-controlled rectifier, sketch the waveforms for following at firing angle Alpha = 90...
For three-phase, Full-wave, Semi-controlled rectifier, sketch the waveforms for following at firing angle Alpha = 90 and over-lap angle Gama = 10 Gama of the diode = 10 Gama of the Thyristor=5 a- The positive and negative voltage relative to neutral. b- The input current for phase (a) Gama diode 10 Gama Thyristor 5 Sketeh a and b
A 3 phase alternator derived by wind Turbine is designed to generate a maximum of 400kw...
A 3 phase alternator derived by wind Turbine is designed to generate a maximum of 400kw at wind speed of 15 m/s. The internal generated voltage of the alternator at rated rotor speed is Eo= 480 v/phase, and the synchronous reactance of the alternator is 1.0 ohm. The output of the alternator is connected to an infinite busbar of 420 v/phase through transmission lines that have reactance of 10 ohm per phase. Draw the per phase equivalent circuit of the...
A) When an alternating voltage of 200 V is applied across a device X, a current...
A) When an alternating voltage of 200 V is applied across a device X, a current of 0.4A flows through the circuit and is in phase with the applied voltage. When the same voltage is applied across another device Y, the same current again flows through the circuit, but it lags behind the applied voltage by π/2radians. Name the devices X and Y. Justify your answer.                                                                   b) A coil of inductance 0.50H and resistance 100 Ω is...