Question

A Cockroft-Walton circuit consists of 10 stages, each using a capacitor of value 0.8 μF. i)...

A Cockroft-Walton circuit consists of 10 stages, each using a capacitor of value 0.8
μF.
i) Compute the load current that can be drawn if the ripple voltage is not to
exceed 800 V, (Assume the circuit is change with a 50 Hz supply).
ii) Compute the voltage drop, ∆V.

Homework Answers

Answer #1

Ans)

given

the equation for ripple voltage is given as

where I is the load current

is the load current that can be drawn

=================

ii)

Now voltage drop is given as

is the answer

===================

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An L-R-C series circuit consists of a 60.0 Ω resistor, a 16.0 μF capacitor, a 4.00...
An L-R-C series circuit consists of a 60.0 Ω resistor, a 16.0 μF capacitor, a 4.00 mH inductor, and an ac voltage source of voltage amplitude 55.0 V operating at 1500 Hz . The current amplitude across the inductor, the resistor, and the capacitor is 0.814A...now, double the frequency and... a. Find new current amplitude across the inductor, the resistor, and the capacitor. b. Find new voltage amplitudes across the inductor, the resistor, and the capacitor.
An L-R-C series circuit consists of a 60.0 Ω resistor, a 16.0 μF capacitor, a 4.00...
An L-R-C series circuit consists of a 60.0 Ω resistor, a 16.0 μF capacitor, a 4.00 mH inductor, and an ac voltage source of voltage amplitude 55.0 V operating at 1500 Hz . a. Find the current amplitude across the inductor, the resistor, and the capacitor. b. Find the voltage amplitudes across the inductor, the resistor, and the capacitor. Enter your answers numerically separated by commas. (VL, VR, VC) e. Find new current amplitude across the inductor, the resistor, and...
A series L-C-R circuit contains a 5.00 μF capacitor, a 0.900 H coil, a 190 Ohms...
A series L-C-R circuit contains a 5.00 μF capacitor, a 0.900 H coil, a 190 Ohms resistor, and a generator producing a maximum voltage of 30.0 V at an angular frequency of 220 rad/s. a. Calculate the impedance of the circuit. b. Calculate the maximum current in the circuit. c. Calculate the maximum voltage drop across the resistor, the capacitor, and the inductor. d. Does the current in this circuit lead the voltage or does the voltage lead the current?...
An electric circuit consists of a capacitor C, coil of inductance L, and a switch. In...
An electric circuit consists of a capacitor C, coil of inductance L, and a switch. In the initial state the capacitor is charged with the voltage V and the switch is off. Then the circuit is switched on. What is the rate of change of the current delta I/ delta t at the initial moment? What physical phenomenon will take place then? What is the maximal current in the circuit?
A voltage impulse generator has 10 stages having the same value of capacitor rated at 0.15...
A voltage impulse generator has 10 stages having the same value of capacitor rated at 0.15 μF and a loading capacitor is rated at 1,500 pF with 150 kV dc charging voltage. Given that an impulse waveform of 1.5/50 μs. Determine; i) The impulse front time, Tf, ii) The impulse tail time, Tt, iii) The constants α and β, iv) Maximum output voltage, Vmax.
Problem 32.51-- A series RLC circuit consists of a 80 Ω resistor, a 0.52 H inductor,...
Problem 32.51-- A series RLC circuit consists of a 80 Ω resistor, a 0.52 H inductor, and a 50 μF capacitor. It is attached to a 120 V/60 Hz power line. a) What is the peak current I at this frequency? Express your answer with the appropriate units b) What is the phase angle ϕ? c) What is the average power loss? Express your answer with the appropriate units.
An ac circuit consists of a 1.00 x 102 Ω resistor, a 1.00 x 10-1 H...
An ac circuit consists of a 1.00 x 102 Ω resistor, a 1.00 x 10-1 H inductor, and a 1.00 x 10-5 F capacitor connected in series with each other and with a generator that supplies a voltage ΔVT = 140 V sin (500t + φ ). 1. Find the following quantities: (a) the impedance, (b) the rms current, (c) the rms voltage drops across the: resistor, inductor and capacitor (d) the average power loss, (e) the phase angle, (f)...
Electrical Circuit A) A factory (with frequency 60 HZ) has the following electrical loads: Induction motors   ...
Electrical Circuit A) A factory (with frequency 60 HZ) has the following electrical loads: Induction motors    of 16 kW at a lagging power factor of 0.8. Induction motors    of 20 kW at a lagging power factor of 0.7. Load of 12 KVA at a lagging factor of 0.9. Load of 10 KVAR at a leading factor of 0.8 a-what is the overall power factor of the factory. b- Assume that the voltage at the input to the factory is 440...
A 210 V, 1200 rpm, 10 A separately excited motor is controlled by 1- phase fully...
A 210 V, 1200 rpm, 10 A separately excited motor is controlled by 1- phase fully controlled converter with an ac source voltage of 230 V, 50 Hz. Assume that sufficient inductance is present in the armature circuit to make to motor current continuous and ripple free for any torque greater than 25% of rated torque, and Ra = 1.5 Ω. i. What should be the value of the firing angle for the rated torque at motoring +ve (1200rpm) ii....
A 100 MVA, 13.2 kV three phase generator (G) having a synchronous reactance of 10% is...
A 100 MVA, 13.2 kV three phase generator (G) having a synchronous reactance of 10% is connected to a three phase Y-Y transformer T1 which feeds a 132 kV 10 miles transmission line having an impedance per phase of 2 + j5 ?/mile. At the receiving end of the transmission line is a Y-Y step down transformer T2. Three loads are connected to the secondary side of the transformer T2. Loads are as follows: Load#1 40 MVA at 0.8 pf...