Question

. The device used to keep transformer oil from deteriorating is the A. surge diverter. B....

. The device used to keep transformer oil from deteriorating is the A. surge diverter. B. baffle. C. activated alumina filter. D. bimetallic element.

Homework Answers

Answer #1

Transformer oil deterioration is caused by moisture and oxidation. Deterioration is mainly due to contamination, overheating, electrical stress, and oxidation

option:D (BIMETALLIC ELEMENT)

A bimetallic strip is used to convert a temperature change into mechanical displacement. The strip consists of two strips of different metals which expand at different rates as they are heated, usually steel and copper, or in some cases steel and brass. The strips are joined together throughout their length by riveting, brazing or welding. The different expansions force the flat strip to bend one way if heated, and in the opposite direction if cooled below its initial temperature. The metal with the higher coefficient of thermal expansion is on the outer side of the curve when the strip is heated and on the inner side when cooled.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
48. A transformer is used to supply a 12-V model train with power from a 110-V...
48. A transformer is used to supply a 12-V model train with power from a 110-V wall plug. The train operates at 50Wofpower.(a)What is the rms current in the secondary coil of the transformer? (b) What is the rms current in the primary coil?(c)What is the ratio of the number of primary to secondary turns? (d) What is the resistance of the train? (e) What is the resistance seen by the 110-V source?
Which of the following best describes a circuit breaker? a. a device that uses a bimetallic...
Which of the following best describes a circuit breaker? a. a device that uses a bimetallic strip to stop a circuit when too much current is going through b. a device that can measure weak spots in a circuit where current does not flow easily c. a single use device that melts when too much current goes through a circuit d. parts on circuit diagrams where one wire passes over another wire thank you An AC current has a frequency...
1>Natural gas: a) includes gas from oil, heavy oil, and oil sands. b) is mostly sourced...
1>Natural gas: a) includes gas from oil, heavy oil, and oil sands. b) is mostly sourced through imports in the U.S. c) used in the U.S. frequently originates in China. d) consumption is increasing because it is the cleanest of the fossil fuels. 4>Renewable energy: a) will replace fossil fuels, due to price, depletion, or carbon emissions, within 10 years. b) is essentially a political issue in developed economies. c) is not actually renewable long term. d) is available everywhere,...
The transformer on a utility pole steps the voltage down from 10000 V to 220 V...
The transformer on a utility pole steps the voltage down from 10000 V to 220 V for use in a college science building. During the day, the transformer delivers electric energy at the rate of 15.0 kW a) Assuming the transformer to be ideal, during that time, what are the primary and secondary currents in the transformer? b) If the transformer is only 85 % efficient (but still delivers electric power at 15.0 kW ), how does its input current...
A displacer is a device used for level measurement. It operates on the principle of weight...
A displacer is a device used for level measurement. It operates on the principle of weight change due to buoyancy as the level changes. A displacer does not float. A typical displacer has dimensions of 45.0 mm diameter by 400 mm long, and a mass of 1.38 kg. It is suspended vertically from a torque tube sensor. a. What is the force exerted by the displacer on the sensor if there is no liquid present? b. What is the force...
1- A diode is used to rectify an ac voltage from a transformer and charge a...
1- A diode is used to rectify an ac voltage from a transformer and charge a 1uF capacitor. Estimate how long it will take the capacitor to discharge from 3 volts to 1.5 volts (once ac voltage is turned off) a) with no load b) with a scope probe across the capacitor. (note: never is not the correct answer) 2- Repeat problem 1 but use the largest value 3 volt super capacitor available from digikey.com.
Oil wells A and B can deliver 25 and 15 units of oil, respectively. Refineries C...
Oil wells A and B can deliver 25 and 15 units of oil, respectively. Refineries C and D need to process 20 and 10 units of oil, respectively. Cost to deliver a unit of oil from a well to a refinery is as follows: $10 from A to C, $8 from A to D, $7 from B to C, and $6 from B to D. How should the oil be delivered to minimize the cost? (Indicate what unknowns are, formulate...
Detector technology in use from the 1920s to the 1970s: A. Charge-coupled device (CCD) B. Hand...
Detector technology in use from the 1920s to the 1970s: A. Charge-coupled device (CCD) B. Hand drawing C. Photographic plate D. Spectrograph
A photocell, such as that illustrated in Figure 6.7(b), is a device used to measure the...
A photocell, such as that illustrated in Figure 6.7(b), is a device used to measure the intensity of light. In a certain experiment, when light of wavelength 590 nm is directed on to the photocell, electrons are emitted at the rate of 5.6 ✕ 10-13 C/s. Assume that each photon that impinges on the photocell emits one electron. How many photons per second are striking the photocell? How much energy per second is the photocell absorbing?
What is the best way to protect an electronic device, which can be destroyed by an...
What is the best way to protect an electronic device, which can be destroyed by an electric field of a lightning? A. Place it in a glass jar B. Place it in a solid metal box C. Leave it open, but keep away from metal objects D. Place it under a large tree