Question

There is a wind turbine close to Lubbock. The turbine capacity is 3 MW, the rotor...

There is a wind turbine close to Lubbock. The turbine capacity is 3 MW, the rotor diameter is 90 meter, and tower height is 110 meter. The Cp is 43.7%.The local met tower has 3 cup anemometer at 10 meter height. The yearly average wind speed at 10 m is 6.1 m/s. How much energy can you produce with the given turbine setup in 3 years at hub height in Lubbock? (Answer in MW)

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
For a wind turbine with a rotor diameter of 43 meters, air density of 1.125 kg/m3,...
For a wind turbine with a rotor diameter of 43 meters, air density of 1.125 kg/m3, and a wind velocity of 10 m/s, Wind power density is calculated as follows: A= Area= ¼ (π) D2 = ¼ (3.1416) (43)2 = 1451m2 Assuming 1m depth of the disk Volume = Area X Depth = 1451m2 X 1m = 1451m3 Mass = Density X Volume = 1.125 kg/m3 X 1451m3 = 1780 kg WPD = Pwr/ A = ½ ρ V3 =...
For an offshore wind farm, a tower is built on the sea floor at a depth...
For an offshore wind farm, a tower is built on the sea floor at a depth of 50m and it rises 30m above the still water level (SWL). Sustained wind in that location is 10 m/s. Ocean wave parameters are: T = 7s and H=3m. Consider the tower as cylindrical and its diameter = 0.75m. Consider wave effect and wind driven current for the submerged portion of the tower, and wind alone above SWL. a) Calculate the total force exerted...
A 3 phase alternator derived by wind Turbine is designed to generate a maximum of 400kw...
A 3 phase alternator derived by wind Turbine is designed to generate a maximum of 400kw at wind speed of 15 m/s. The internal generated voltage of the alternator at rated rotor speed is Eo= 480 v/phase, and the synchronous reactance of the alternator is 1.0 ohm. The output of the alternator is connected to an infinite busbar of 420 v/phase through transmission lines that have reactance of 10 ohm per phase. Draw the per phase equivalent circuit of the...
Part II HAWT DESIGN QUESTIONS Hint: questions 1-3 are answered in terms of the definition of...
Part II HAWT DESIGN QUESTIONS Hint: questions 1-3 are answered in terms of the definition of Cp. 1. Doubling power output requires what % increase in diameter? _______ Why? ___________________ 2. Doubling wind speed provides what % increase in power? _______ Why? __________________________ 3. Reducing air density by 10% changes power by what percentage? Increase or decrease in power? ________________________________________________________________________________ 4. Doubling wind speed requires what change in rpm (to provide same efficiency)? (Hint: Dynamic similarity requires same tip speed...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT