Question

A leaf spring is to be made of seven steel plates 65 mm wide and 6.5...

A leaf spring is to be made of seven steel plates 65 mm wide and 6.5 mm thick. Calculate the length of the spring, so that it may carry a central load of 2.75 kN, the bending stress being limited to 160 MPa. Also calculate the deflection at the centre of the spring. Take E for the spring material as 200 GPa

Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

I have solved in detail for you. If you have any doubt in this feel free to ask in comment. Please don't forget to upvote. Thanks

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Two steel plates ( 110 mm ) wide and ( 15 mm ) thick are to...
Two steel plates ( 110 mm ) wide and ( 15 mm ) thick are to be joined by double transverse fillet weld , the dynamic tensile stress is not exceed ( 46.66 MPa ). Find the length of the weld for:- 1- Static loading , and 2- Dynamic loading. * Two steel plates ( 110 mm ) wide and ( 15 mm ) thick are to be joined by double transverse fillet weld , the dynamic tensile stress is...
WITH COMPLETE SOLUTION A welded steel girder having the cross section of two fabricated 280 mm...
WITH COMPLETE SOLUTION A welded steel girder having the cross section of two fabricated 280 mm x 25 mm flange and a 600 mm x 15 mm web plate. The plates are joined by four fillet welds that run continuously for the length of the 6 m span girder. Each weld has an allowable load of 330 kN/m. 1.Determine the maximum allowable shear force V for the girder in kN. 2. Calculate the maximum bending stress of the girder if...
mechanical component is 200 mm wide, and 10 mm thick, made of aluminum and yields a...
mechanical component is 200 mm wide, and 10 mm thick, made of aluminum and yields a stress of 240 Mpa. calculate the max safe load P if the normal stress cannot exceed yield stress. Factor of safety is 3.
A hollow circular steel column 2m long and outer diameter 200 mm carries an axial load...
A hollow circular steel column 2m long and outer diameter 200 mm carries an axial load of 325 kN. If the compressive stress is 150 MPa, lateral strain for external diameter is is 0.000325 and Poisson’s ratio is 0.3, find the minimum wall thickness required for the column. Also calculate the shear modulus for the material of the column. Take E = 210 GPa.   
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT