Question

A 132 KV, 50 HZ, 3 phase, 3 core metal sheathed cable gave the following resutls...

A 132 KV, 50 HZ, 3 phase, 3 core metal sheathed cable gave the following resutls in testing for capacitance:
(a) capacitance between shorted conductors and sheath is 0.8 micro farad.
(b) capacitance between two conductors shorted with sheath and the third conductor is 0.6 micro farad.

Draw the test arrangment in each case and determine:
(i) the capacitance between any two conductors.
(ii) the conductor self capacitance and the capacitance between any two shorted conductors and the third conductor.
(iii) the charging current and charging power for a power factor of 0.25 .
(iv) the power loss and loss angle.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The capacitances per Km of 3 core cable are 0.9 micro farad between the three bunched...
The capacitances per Km of 3 core cable are 0.9 micro farad between the three bunched conductor and the sheath, and 0.4 micro farad between one conductor and the other two connected to the sheath. Draw the arrangement in each case and find: a) the line to ground capacitance of a 20 Km cable length. b) charging current if the cable operates at 11 KV line voltage at 50 HZ. c) the power loss and loss angle if the power...
The capacitance of a 3 core cable belted type are measured and found as follows: (i)...
The capacitance of a 3 core cable belted type are measured and found as follows: (i) the capacitance between 3 cores connected together and the sheath is 8 uF. (ii) the capacitance between one core conductor and the other two conductors connected together to the sheath is 5 uF. Draw the measurement configuration and the equivalent circuit for both cases and calculate: a) the capacitance to the neutral and the capacitance between any two conductors. b) the charging current and...
1. A 7 kV 60 Hz single phase two-wire overhead line has Dove ACSR conductors with...
1. A 7 kV 60 Hz single phase two-wire overhead line has Dove ACSR conductors with 1 m horizontally between conductors. Calculate resistance , inductance ,and reactance. 2. A 12 kV 60 Hz three-phase three-wire overhead line has Drake ACSR conductors spaced 4 ft apart in an equilateral triangle. Calculate resistance , inductance ,and reactance . 3. A 230 kV, 60 Hz, three-phase transposed overhead transmission line has one ACSR 954 kcmil conductor per phase and flat horizontal spacing with...
A 3 phase 11 kv,25 mva, 60 Hz salient pole synchronous motor is running from a...
A 3 phase 11 kv,25 mva, 60 Hz salient pole synchronous motor is running from a 11 Kv, 60 Hz balanced three phase supply the meachince reactances are Xd=1.2 pu and Xq=0.6 pu ,neglect the meachanicalloss and armature copper loss the maximum power input is obtained with no field excitation determine the power factor of motor
A 250 km , three- phase , 50 Hz transmission line is delivering 25 MVA at...
A 250 km , three- phase , 50 Hz transmission line is delivering 25 MVA at 0.8 lagging power factor to a balanced load at 132 KV ( line-line) . The conductor resistance is 0.11 ohm/km . The line inductance per phase is 1.24 mH/km and the line to neutral capacitance is given as 9.4 x 10 – 9 F/km. a ) find the nominal – Л representation. b) find the sending end voltage , VS by nominal – Л...
A 10-kVA, 250 / 100-V, 50-Hz single-phase transformer gave the following open and short circuit test...
A 10-kVA, 250 / 100-V, 50-Hz single-phase transformer gave the following open and short circuit test results: Open circuit test: 250 V, 2.6 A, power factor: 0.3 on HV side. Short circuit test: 18 V, 80 A, input power: 240 W on HV side. Calculate the following: 4.1 The equivalent circuit parameters of the transformer. (6) 4.2 The efficiency at full load unity power factor. (NB the test current is not at full load) (6) 4.3 The load at which...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT