Question

Use logic gates to design an anticoincidence circuit, that is, a circuit that will produce an...

Use logic gates to design an anticoincidence circuit, that is, a circuit that will produce an output whenever a pulse appears at input A, provided that it does not appear simultaneously at input B.

Please show the steps to solve this problem and design this circuit.

Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Assume that you are asked to design a logic circuit with the following specifications, using K-map....
Assume that you are asked to design a logic circuit with the following specifications, using K-map. The circuit has two inputs X and Y and three outputs O0, O1 and O2. This circuit operates as follows: (1) the output (O0) will be high when XY only, and (3) the output (O2) will be high when X=Y only. a)Create the truth table for this logic circuit. b) Show the Karnaugh maps. c) Draw the schematic, using logic gates.
Using logic gates, design a 4-bit digital-to-analog converter that can produce voltages in the range 0V...
Using logic gates, design a 4-bit digital-to-analog converter that can produce voltages in the range 0V to 5V. (Hint: The highest output voltage that can be reached is actually below 5V.)
Assume that you are asked to design a logic circuit with the following specifications, using K-map....
Assume that you are asked to design a logic circuit with the following specifications, using K-map. The circuit has two inputs X and Y and three outputs O0, O1 and O2. This circuit operates as follows: (1) the output (O0) will be high when X<Y only, (2) the output (O1) will be high when X>Y only, and (3) the output (O2) will be high when X=Y only. a. (3 points) Create the truth table for this logic circuit. b. (3...
Without using Verilog, use D-type flip-flops and combinational logic to design a synchronous Moore finite-state machine...
Without using Verilog, use D-type flip-flops and combinational logic to design a synchronous Moore finite-state machine that monitors input A and asserts a binary output B if the sequence 101 is observed. For example: A=010101101 B=000101001 ---------------- time a) Draw the state transition graph b) Draw the encoded next state/output table c) Determine the minimal circuit realization of the next state logic and output d) Draw the circuit e) Draw a timing diagram using the input sequence above showing the...
Q/ Design a full adder using 2-input XOR, AND, and OR gates. Show all the steps...
Q/ Design a full adder using 2-input XOR, AND, and OR gates. Show all the steps including the truth table, output expressions/equations, simplifications etc.
7a) Design a timer circuit with an asynchronous set and reset and a clock input, and...
7a) Design a timer circuit with an asynchronous set and reset and a clock input, and a single output, such that the output is a logic 1 for 7 clock cycles, and then switches to a logic 0. The set input may be used to set the output to 1. Your circuit should include a counter. b) Implement the above timer using behavioral Verilog.
Logic lap Material I need to write report more than 3 papers in report please. Design...
Logic lap Material I need to write report more than 3 papers in report please. Design a 4-bit even parity generator circuit. using. A) Basic logic gates. b) Decoder IC
4. Using an op amp, design a circuit to produce an output voltage related to two...
4. Using an op amp, design a circuit to produce an output voltage related to two input voltages by the equation ?? = 1 2 ?2 − ?? (Use the feedback resistance R2 = 10kΩ). Devise a procedure to verify your design.
In MultiSim, design a PWM circuit. You will need a 0 to 9 counter, which you...
In MultiSim, design a PWM circuit. You will need a 0 to 9 counter, which you should build from flip flops and basic logic gates. The PWM input will come from 4 input switches as a binary number. For the comparator, you can build your own from basic gates, or use one of the commercially available comparator chips (74HC85 Digital IC). An oscilloscope in MultiSim can be used to verify duty cycles.
F = AB + BC’ = (A'+B')(B'+C) I need to use this to make a logic...
F = AB + BC’ = (A'+B')(B'+C) I need to use this to make a logic diagram with ALL NOR gates! Also, my professor said to design the circuit with only (1) 74H02 Chip?? anytime I build one its does not follow the truth table. need help.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT