Question

c1=c2=c3=c4=75uF, E=8V. circuit connected. Find the potential difference across C4, and the charge on C3.

Answer #1

potential difference between C4 is 2 Volt

and charge on C3 is 150 micro culomb

I have four capacitors
with capacitances C1, C2, C3, and C4 connected in
series. To save space I replace them with a single
capacitor that has the same equivalent capacitance C as the four
capacitors together. Which of the following is true?
A. C>C1
B. C<C2
C. C=C3
D. Not enough information to answer.
2. The role of a resistor in the circuit is to
A. Convert kinetic energy of the electrons to thermal energy
B. Convert thermal energy to...

Consider the circuit shown below where four capacitors,
C1=1.3 μF
, C2=3.7 μF ,
C3=2.5 μF and C4=1.2 μF
are connected to a battery of voltage V=41 V.
Determine the voltage on C2. Express your answer
using one decimal place in units of Volts.

A capacitance C1 = 14.6 μF is connected in series with a
capacitance C2 = 5.8 μF, and a potential difference of 150 V is
applied across the pair.
a. Calculate the equivalent capacitance.
b. What is the charge on C2?
c. What is the charge on C1?
d. What is the potential difference across C2?
e. What is the potential difference across C1?
(c25p72) Repeat for the same two capacitors but with them now
connected in parallel.
f. Calculate...

Capacitor C1 = 10.0 micro F is connected in series to parallel
combination of capacitors C2=7.0 microF and C3=8.0 microF. This
circuit is connected to a battery delivering V=15.0 V. Find charge
stored in capacitor C2 in mircoC.

Capacitor C1=4.0 microF is connected in parallel to the series
combination of capacitors C2=13.0 microF anf C3=14.0 microF. This
combination if connected to a battery of V=15.0 V. Find potential
difference on capacitor C3.

Three Capacitor are connected in series ; C1 = 2.9 ; C2 = 2.6 ;
C3 = 5.4 all micro Farads. What is the equivalent Capacitance ?

Suppose that 4?/(7+?)=∑?=0∞????.4x/(7+x)=∑n=0∞cnxn.
Find the first few coefficients.
?0=c0=
?1=c1=
?2=c2=
?3=c3=
?4=c4=
Find the radius of convergence ?R of the power series.
?=R=

A 28.2×10-6 F capacitor C1 is charged to a
potential difference of 87.63 V. The capacitor is then removed from
the charging source and then connected across a second initially
uncharged capacitor C2. The final potential difference
across each capacitor after they have been connected in 5.57 V.
Find the value of the capacitance C2 ?

Two capacitors of equal area, but with different capacitances
C1 and C2, are connected to a battery in
series. If C1 = 3C2, which one of the
following statements is true?
a) The electric energy stored in C1 is 3 times
smaller than C2.
b) The amount of charge on C1 is 3 times larger than
C2
c) The electric field between the two plates of C1 is
9 times larger than C2
d) The voltage across C1 is 3...

Two parallel-plate capacitors C1 and
C2 are connected in series to a battery. Both
capacitors have the same plate area of 3.40 cm2 and
plate separation of 2.65 mm. However, the first capacitor
C1 is filled with air, while the second
capacitor C2 is filled with a dielectric that
has a dielectric constant of 3.40. The total charge on the series
arrangement is 13.8 pC.
(a) What is the battery voltage?
V
(b) What is the potential difference across each...

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 3 hours ago

asked 3 hours ago

asked 4 hours ago

asked 4 hours ago