Question

A 6-pole winding linear induction motor is provided, driven at a speed of 1050 rpm, and...

A 6-pole winding linear induction motor is provided, driven at a speed of 1050 rpm, and the resistance on the secondary side 1 is 0.04 [ohm]. Determine the number of revolutions [rpm] when changing the resistance of the secondary circuit to three times.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 6-pole and three-phase induction motor has synchronous speed of 1125 RPM. a) Find the no-load...
A 6-pole and three-phase induction motor has synchronous speed of 1125 RPM. a) Find the no-load and full-load operating speed of motor for the cases given 1. 2.5Hz electrical frequency of rotor for no-load condition. (15p) 2. 6.3Hz electrical frequency of rotor for full-load condition. (15p) b) Find the speed regulation of motor by using parameters found above. (10p) c) Determine the electrical frequency of rotor under full-load condition so that speed regulation would be equal to 5%? (Electrical frequency...
A three phase, 4 pole induction motor has the nominal speed of 1425 rpm. If the...
A three phase, 4 pole induction motor has the nominal speed of 1425 rpm. If the stator, rotor and airgap losses are all the same what is the efficiency of the machine?
2. A 6-pole and three-phase induction motor has synchronous speed of (1000+X) RPM. a) Find the...
2. A 6-pole and three-phase induction motor has synchronous speed of (1000+X) RPM. a) Find the no-load and full-load operating speed of motor for the cases given, 1. 2.5Hz electrical frequency of rotor for no-load condition. (15p) 2. 6.3Hz electrical frequency of rotor for full-load condition. (15p) b) Find the speed regulation of motor by using parameters found above. (10p) c) Determine the electrical frequency of rotor under full-load condition so that speed regulation would be equal to 5%? (Electrical...
Problem 4: A 6 pole, three phase, 50 Hz induction motor has rotor resistance of 0.075...
Problem 4: A 6 pole, three phase, 50 Hz induction motor has rotor resistance of 0.075 ohm and standstill reactance of 0.125 ohm per phase. On full load it is running at a speed of 240 r.p.m. The rotor induced e.m.f per phase at standstill is observed to be 16 V. Calculate; Starting torque, Full load torque Maximum torque Speed at max torque Problem 5: The following data refers to a 10-pole, 200 V, 50 Hz, 3 phase induction motor?
A 230 volt, 60 Hz, 4 pole star connected, three phase induction motor operates at a...
A 230 volt, 60 Hz, 4 pole star connected, three phase induction motor operates at a full load speed of 1710 rpm. The power developed at this speed is 2 horse power. If the supply voltage fluctuates ±10%, determine the torque range of the motor.
A 3-phase 50Hz 2-pole 440V (L-L rms) induction motor drive has a rated speed of 2955...
A 3-phase 50Hz 2-pole 440V (L-L rms) induction motor drive has a rated speed of 2955 rpm and rated torque of 35 Nm. This motor drives a load with a torque characteristic that increases linearly with speed such that it equals the load torque at the rated speed. It draws a current of 3.0 A(rms) per phase at the rated voltage at a power factor of 0.81 (lagging). The stator resistance Rs = {r_s} ohms. At the rated operating speed,...
Problem 1: A 800 V, 4 pole, 3 phase, and 50 Hz star connected induction motor...
Problem 1: A 800 V, 4 pole, 3 phase, and 50 Hz star connected induction motor has a rotor resistance and reactance per phase equal to 0.02 ohm and 0.2 ohm respectively. Determine 1) starting torque 2) slip at which maximum torque will occur 3) speed at which maximum torque will occur 4) Maximum torque 5) full load torque if full load slip is 8%. Assume ratio of stator to rotor turns as 8.
A three-phase, 60-Hz, 4-pole, 440-V (line-line, rms) induction-motor drive has a full-load (rated) speed of 1746...
A three-phase, 60-Hz, 4-pole, 440-V (line-line, rms) induction-motor drive has a full-load (rated) speed of 1746 rpm. The rated torque is 40 Nm. Keeping the air gap flux-density peak constant at its rated value. The frequency and voltage of the motor from above are adjusted such that the fan speed is changed to 600 rpm. The motor should be operating at 3% slip and rated Bm. What is the motor efficiency?
1) A DC machine induces an EMF of 240 v at 1500 rpm. Find the developed...
1) A DC machine induces an EMF of 240 v at 1500 rpm. Find the developed torque for an armature current of 25A. 2) Draw and explain all characteristics of d.c. Shunt motor. 3) State accessitivity of 3 point starter. 4) A four pole wave connected dc armature has 50 slots with 10 conductors per slot. The armature is rotated at 1000 rpm of the useful flux per pole is 30mwb, calculate the amount of EMF induced. 5) A 6...
A 3-phase, 380 V, 50 Hz , 6 pole, Y-connected induction motor has R1 = 0.1...
A 3-phase, 380 V, 50 Hz , 6 pole, Y-connected induction motor has R1 = 0.1 W , X1 = 0.4 W, R2’ = 0.12 W , X2’ = 0.4 W, Xm = 20 W , Pr = 1 kW. The motor is operated at 970 rpm what is the output shaft torque?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT