Question

A heater takes 10 A rms from the 230 V rms supply. How much power is the heater consuming?

Answer #1

I need thumbs up please give me.

Thank you.

A 630-W space heater is designed for operation in Germany, where
household electric outlets supply 230 V (rms) service. What is the
power output of the heater when plugged into a 120-V (rms) outlet
in a house in the United States? Ignore the effects of temperature
on the heater's resistance.

A power plant produces an rms voltage of Vp = 12.0 x 10^3 V and
an rms current of Ip = 180 A. The rms voltage is stepped up to 300
x 10^3 V by a transformer before it is transmitted to a substation.
The resistance of the transmission line is between the power plant
and the substation is R = 1000Ω.
a) What is the turns ration Ns/Np for this transformer?
b )What is the rms current in the...

A 3.00 kW space heater designed for use in a European country
where the rms voltage is 225V is being used in a US household wher
ethe rms voltage is 110.0 V. Ignoring the effect of temperature on
the heater's resistance, determine the power output of the heater
in the American household. Find also the peak currents through the
heater in the two households.

48. A transformer is used to supply a 12-V model train with
power from a 110-V wall plug. The train operates at
50Wofpower.(a)What is the rms current in the secondary coil of the
transformer? (b) What is the rms current in the primary
coil?(c)What is the ratio of the number of primary to secondary
turns? (d) What is the resistance of the train? (e) What is the
resistance seen by the 110-V source?

A transformer connected to a 120 −V ac line is to supply 12.0 VV
(rms) to a portable electronic device. The load resistance in the
secondary is 5.20 ΩΩ .
- What should the ratio of primary to secondary turns of the
transformer be, What rms current must the secondary supply?
- What average power is delivered to the load, What resistance
connected directly across the source line (which has a voltage of
120 −V) would draw the same power...

An AC power generator produces 54.5 A (rms) at 3630 V (rms).
(a) Find the power (kW) produced by this generator.
(b) If this power is transmitted through a long-distance power
line that has a resistance of 11.3 ohms, find the power (kW)
dissipated as heat in the power line.
If the voltage of the power generator is stepped up to 175 kV by
an ideal transformer before being transmitted, find (c) the current
(A) in the power line and...

A load draws 5 kVAR at a power factor of 0.86 (leading) from a
220-V rms source. Calculate the peak current and the apparent power
supplied to the load.

An AC generator supplies an rms voltage of 230 V at 60.0 Hz. It
is connected in series with a 0.250 H inductor, a 5.60 μF capacitor
and a 366 Ω resistor.
What is the impedance of the circuit?
Tries 0/20
What is the rms current through the resistor?
Tries 0/20
What is the average power dissipated in the circuit?
Tries 0/20
What is the peak current through the resistor?
Tries 0/20
What is the peak voltage across the inductor?...

2. AC supply voltage V= 230 Vrms at 60 Hz is connected to a RL
load of resistance, R = 10 ohms and
inductance, L= 20 mH. Predicts the current lagging and power loss
due to lagging effect.

An AC power generator produces 20 A (max) at 30000 V
(rms). The voltage is stepped down to 10000 V by an ideal
transformer and the energy is transmitted through a power line
which has a resistance of 50 ohms. What energy is dissipated as
heat in the power line in 10 hours?. Show step by step solution

ADVERTISEMENT

Get Answers For Free

Most questions answered within 1 hours.

ADVERTISEMENT

asked 7 minutes ago

asked 17 minutes ago

asked 20 minutes ago

asked 23 minutes ago

asked 36 minutes ago

asked 1 hour ago

asked 1 hour ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago

asked 2 hours ago