Question

A three-phase decapolar motor consumes a power of 250 KW when working at full load at...

A three-phase decapolar motor consumes a power of 250 KW when working at full load
at 550 rpm It has an efficiency of 82.5% and is connected to a network of 380 V at 50 (Hz). The
company where the kilowatt hour is invoiced at $ 183.95. When replaced by a
engine of similar characteristics but with 94% efficiency, the power [kW saved
it will be

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A three-phase decapolar motor consumes a power of 250 KW when working at full load at...
A three-phase decapolar motor consumes a power of 250 KW when working at full load at 550 rpm It has an efficiency of 82.5% and is connected to a network of 380 V at 50 (Hz). The company where the kilowatt hour is invoiced at $ 183.95. When replaced by a engine of similar characteristics but with 94% efficiency, the power [kW saved it will be
Q4) A three-phase, 104 kW, 3300 V, 50 Hz, Y-connected induction motor delivers full output power...
Q4) A three-phase, 104 kW, 3300 V, 50 Hz, Y-connected induction motor delivers full output power to a load connected to its shaft. The full-load slip is 0.02 and full-load power factor is 0.85 lagging. If the stator copper loss is 2400 W, the stator core loss is 3500 W, and the friction and windage loss is 1200 W. Calculate: (i) The developed mechanical power. (ii) The air gap power. (iii) The rotor copper loss. (iv) The efficiency of the...
A 37.3 kW, 3 phase, 4 pole, 50 Hz, induction motor has a full load efficiency...
A 37.3 kW, 3 phase, 4 pole, 50 Hz, induction motor has a full load efficiency of 85%. The friction and windage losses are one third of the no load losses and the copper loss equals the iron loss at full load. Find the full load speed. Stator resistance may be neglected. [Answer: 1401.3 rpm]
A 100 KW (OUT PUT), 3300V, 50 Hz, 3-Phase star connected induction motor has a synchronous...
A 100 KW (OUT PUT), 3300V, 50 Hz, 3-Phase star connected induction motor has a synchronous speed of 500 rpm. The full load slip is 1.8%and full load power factor 0.85. Stator copper loss=2440W. Iron loss=3500W. Rotational losses= 1200W. calculate : The rotor copper loss The line current The full load motor efficiency.
Consider a three-phase squirrel cage motor powered at 220 V / 60 Hz. It is known...
Consider a three-phase squirrel cage motor powered at 220 V / 60 Hz. It is known that at full load the power demanded from the network is 20,800 W, the line current is 64 A, and the speed is 830 rpm. The engine was designed to deliver a power of 25 HP. Calculate at full load: e) Output power f) The developed pair g) Efficiency
A four-pole asynchronous motor, indicates on its plate a power of 12.3 kW. It is star...
A four-pole asynchronous motor, indicates on its plate a power of 12.3 kW. It is star connected to a 60 Hz system and works at full load with a speed of 1746 rpm. Friction losses are 400 W, by Joule effect in stator 950 W and in rotor 350 W. Magnetic losses are 0.23 kW. Determine performance, synchronous speed, and slip.
A 230 volt, 60 Hz, 4 pole star connected, three phase induction motor operates at a...
A 230 volt, 60 Hz, 4 pole star connected, three phase induction motor operates at a full load speed of 1710 rpm. The power developed at this speed is 2 horse power. If the supply voltage fluctuates ±10%, determine the torque range of the motor.
A three-phase, 60-Hz, 4-pole, 440-V (line-line, rms) induction-motor drive has a full-load (rated) speed of 1746...
A three-phase, 60-Hz, 4-pole, 440-V (line-line, rms) induction-motor drive has a full-load (rated) speed of 1746 rpm. The rated torque is 40 Nm. Keeping the air gap flux-density peak constant at its rated value. The frequency and voltage of the motor from above are adjusted such that the fan speed is changed to 600 rpm. The motor should be operating at 3% slip and rated Bm. What is the motor efficiency?
A 208 V 10 Hp four pole 60 Hz Y connected induction motor has a full...
A 208 V 10 Hp four pole 60 Hz Y connected induction motor has a full load slip of 5%. What is the output power of this motor in kW? If friction and windage loss is 350 watts, what is the gross mechanical output at full load? What is the gross torque of this motor at full load? What is the rotor cupper loss at full load? If the efficiency of this motor is 90% at full load what is...
A three phase Wye-connected 460 v, 4 poles, 60 Hz wound rotor induction motor has the...
A three phase Wye-connected 460 v, 4 poles, 60 Hz wound rotor induction motor has the following parameters: R1=0.3, R2=0.15, X1=0.5, X2=0.2, Xm=14 The total friction, windage, and core loss is constant at 400 w. The motor is working at its rated voltage and drives its load at 1764 rpm. a)Calculate the input current and the input power. b)Calculate the output mechanical power and torque and motor efficiency. c)Calculate the starting current of this motor and compare it with its...