Question

Question 1: please choose the correct answer only without explain anything:

1. ___________ or inductors may distort the rectifier output because of the charging and discharging of those devices

1. Capacitors
2. Resistors
3. Semiconductors
4. insulators

2. An LED emit light when __________ biased.

1. Open
2. Reverse
3. Forward
4. Shunt

3. The voltage output from a bridge rectifier looks like a continuous series of half-wave pulses from the AC source with peaks that slightly lower because of the barrier voltage of __________ diodes

1. Two
2. Four
3. Eight
4. Six

4. A typical full -wave rectifier circuit consists of a center-tapped transformer, two __________, and a resistive load..

1. Resistors
2. Diodes
3. Capacitors
4. Conductors

5. A typical bridge rectifier circuit consist of an AC voltage source,___________ diode(s), and a resistive load..

1. One
2. Four
3. Two
4. Eight

6. A(n)____________ is an Ac to power supply typically used to speed up and slow down a motor

1. Rheostat
2. Transformer
3. Variable Frequency Drive
4. Dynometers

please only i need the answers without any information

please as soon as possible

Answer 1

A. Capacitors or inductors may distort the rectifier output because of the charging and discharging of those devices.

.An LED emit light when forward biased.

The voltage output from a bridge rectifier looks like a continuous series of half-wave pulses from the AC source with peaks that slightly lower because of the barrier voltage of two diodes.

A typical full -wave rectifier circuit consists of a center-tapped transformer, two diodes , and a resistive load.

A typical bridge rectifier circuit consist of an AC voltage source four diode(s), and a resistive load.

Variable. Frequency drive   is an Ac to power supply typically used to speed up and slow down a motor