Question

If an induction motor is driving a certain mechanical load at 7% slip. If there is...

If an induction motor is driving a certain mechanical load at 7% slip. If there is no other external change takes place, what is the value which will slip change if the line frequency drops from 60 Hz to 50 Hz ?

Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A three-phase, 60-Hz, 4-pole, 440-V (line-line, rms) induction-motor drive has a full-load (rated) speed of 1746...
A three-phase, 60-Hz, 4-pole, 440-V (line-line, rms) induction-motor drive has a full-load (rated) speed of 1746 rpm. The rated torque is 40 Nm. Keeping the air gap flux-density peak constant at its rated value. The frequency and voltage of the motor from above are adjusted such that the fan speed is changed to 600 rpm. The motor should be operating at 3% slip and rated Bm. What is the motor efficiency?
Question A 208 V 10 Hp four pole 60 Hz Y connected induction motor has a...
Question A 208 V 10 Hp four pole 60 Hz Y connected induction motor has a full load slip of 5%. a)-What is the synchronous speed of this motor? b)-What is the shaft speed of this motor at full load? c)-What is the frequency of rotor current at full load? d)-What is the shaft torque of this motor at full load? e)-If the efficiency of this motor is 90% at full load what is the input power f)-If the efficiency...
A 208 V 10 Hp four pole 60 Hz Y connected induction motor has a full...
A 208 V 10 Hp four pole 60 Hz Y connected induction motor has a full load slip of 5%. What is the output power of this motor in kW? If friction and windage loss is 350 watts, what is the gross mechanical output at full load? What is the gross torque of this motor at full load? What is the rotor cupper loss at full load? If the efficiency of this motor is 90% at full load what is...
1, Explain the relation between reactive and real power in squirrel cage induction motor with load...
1, Explain the relation between reactive and real power in squirrel cage induction motor with load and with no load. ( just explain no need formulas) 2, in squirrel cage induction motor with load , what is the relation of Torque -speed curve , line current vs rated load and slip Vs rated load.
Q4) A three-phase, 104 kW, 3300 V, 50 Hz, Y-connected induction motor delivers full output power...
Q4) A three-phase, 104 kW, 3300 V, 50 Hz, Y-connected induction motor delivers full output power to a load connected to its shaft. The full-load slip is 0.02 and full-load power factor is 0.85 lagging. If the stator copper loss is 2400 W, the stator core loss is 3500 W, and the friction and windage loss is 1200 W. Calculate: (i) The developed mechanical power. (ii) The air gap power. (iii) The rotor copper loss. (iv) The efficiency of the...
A 100 KW (OUT PUT), 3300V, 50 Hz, 3-Phase star connected induction motor has a synchronous...
A 100 KW (OUT PUT), 3300V, 50 Hz, 3-Phase star connected induction motor has a synchronous speed of 500 rpm. The full load slip is 1.8%and full load power factor 0.85. Stator copper loss=2440W. Iron loss=3500W. Rotational losses= 1200W. calculate : The rotor copper loss The line current The full load motor efficiency.
a squirrel cage induction machine is driving a 700 N load through a wheel with a...
a squirrel cage induction machine is driving a 700 N load through a wheel with a diameter of 0.5 m using the simplified gamma model and the machine parameters presented below calculate the followings: a) The speed of the machine, assuming a flux linkage of 0.703: b)Stator current phasor is: c)Active power, reactive power, apparent power, and power factor from the point of view of the source the parameters are: -line to line voltage 480 v - # poles 4...
A 480V, 60 Hz, 6-pole, three-phase, delta-connected induction motor has the following parameters: R1=0.461 Ω, R2=0.258...
A 480V, 60 Hz, 6-pole, three-phase, delta-connected induction motor has the following parameters: R1=0.461 Ω, R2=0.258 Ω, X1=0.507 Ω, X2=0.309 Ω, Xm=30.74 Ω Rotational losses are 2450W. Core loss is neglected. The motor drives a mechanical load at a speed of 1170 rpm. Ns = 1200rpm slip = 0.025 Line current = 26.87 angle -0.38 Pin = 20.745KW Airgap power = 19.71KW Converted power = 19.21KW Torque = 156.85Nm Pout = 16.76KW efficiency = 80.79% Find : 1. Pullout slip...
The synchronous generator or alternator is an electrical machine that converts the mechanical power from a...
The synchronous generator or alternator is an electrical machine that converts the mechanical power from a prime mover into an AC electrical power at a particular voltage and frequency. The synchronous motor always runs at a constant speed called synchronous speed. A three phase, 8 pole, synchronous Generator is coupled to a diesel engine running at 500 rpm. It supplies an induction motor which has a full load speed of 1440 rpm. Find the percentage slip and number of poles...
7-     a 3 phase induction motor haring a synchronous speed is 1600 rpm. it draws a...
7-     a 3 phase induction motor haring a synchronous speed is 1600 rpm. it draws a current of 100Kw a from a 3-phase source. The copper losses and iron losses in the stator are 6KW if the motor runs at 1500 rpm, calculate the following A- The active power transom to the rotor B- The rotor I2R losses C- The mechanical power developed. D- The mechanical power delivered to the load, knowing that the windage and friction losses are equal...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT