Question

A 120Vac Rms 60Hz line is connected to a triac with a firing angle of 98...

A 120Vac Rms 60Hz line is connected to a triac with a firing angle of 98 degrees. What is the Rms voltage at the triac output? Plot the triac output line voltage.

Engineering   Electrical-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 3- phase, 2 pole Y-connected synchronous machines has a line-line voltage of 6,000V in 60Hz...
A 3- phase, 2 pole Y-connected synchronous machines has a line-line voltage of 6,000V in 60Hz power line, has an armature reactance of 2ohms/ phase and negligible armature resistance. Compute the following A) In case of generating action if the line current is 385 A at a leading power factor of 0.8, the armature voltage per phase is 3464V, Compute the voltage per phase and power angle. B) Draw the phasor diagram. C) If the losses in the machine is...
The controlled full wave rectifier is connected to the grid. The rms grid voltage is 230...
The controlled full wave rectifier is connected to the grid. The rms grid voltage is 230 Volt at 50 Hz. 24 Volt battery will be charged with 15A. An inductor, which is series connected to the battery, is used to limit the current ripple. Only The second harmonics of the output voltage is taken into account. The inductor R/L ratio is 50. The current ripple is allowed to be 4 amp peak to peak. Determine the firing angle and R...
A resistor, inductor, and a capacitor are connected in series, each with an effective (rms) voltage...
A resistor, inductor, and a capacitor are connected in series, each with an effective (rms) voltage of 65V, 140V and 80V, respectively. What is the phase angle in the circuit? (ans: 43 degrees)
A balanced wye-connected three-phase source has line-to-neutral voltages of 400 V rms. - Find the rms...
A balanced wye-connected three-phase source has line-to-neutral voltages of 400 V rms. - Find the rms line-to-line voltage magnitude. - If this source is applied to a wye-connected load composed of three 33 Ω resistances, find the rms line-current magnitude. - If this source is applied to a wye-connected load composed of three 33 Ω resistances, find the total power delivered.
A 38.6 uF capacitor is connected to a 46.2 ohm resistor and a generator whose rms...
A 38.6 uF capacitor is connected to a 46.2 ohm resistor and a generator whose rms output is 23.5 V at 60.0 Hz. Calculate the rms current in the circuit. Calculate the voltage drop across the resistor. Calculate the voltage drop across the capacitor. Calculate the phase angle for the circuit.
A transformer connected to a 120 −V ac line is to supply 12.0 VV (rms) to...
A transformer connected to a 120 −V ac line is to supply 12.0 VV (rms) to a portable electronic device. The load resistance in the secondary is 5.20 ΩΩ . - What should the ratio of primary to secondary turns of the transformer be, What rms current must the secondary supply? - What average power is delivered to the load, What resistance connected directly across the source line (which has a voltage of 120 −V) would draw the same power...
A 50.0 Hz generator with an rms voltage of 115 V is connected in series to...
A 50.0 Hz generator with an rms voltage of 115 V is connected in series to a resistor 3.29 kΩ and a capacitor 2.50 μF . A) At what frequency must this circuit be operated for the current to lead the voltage by 24.0 degrees∘? B) Using the frequency found in part A, find the average power consumed by this circuit.
Determine the total impedance, phase angle, and rms current in an LRC circuit connected to a...
Determine the total impedance, phase angle, and rms current in an LRC circuit connected to a 10.0 kHz , 891 V (rms) source if L = 28.4 mH , R = 7.12 kΩ , and C = 6750 pF Please circle all three answers
A charging stand for an electric razor is [pwered by a standard 60Hz, 120 VAC (rms)...
A charging stand for an electric razor is [pwered by a standard 60Hz, 120 VAC (rms) wall outlet. A. The charging base contains a 2- turn circular coil of wire with an area of 5.0 cm2 . The two ends of the coil are connected to thte 120 VAC source. Assuming that the resistance of the coil is negligible, what is the rms value of d(phi)/dt in the base of the coil (magnetic flux)? B. The razor also has a...
Q3/ Draw the out voltage and current waveforms of a single-phase cycloconverter connected to a purely...
Q3/ Draw the out voltage and current waveforms of a single-phase cycloconverter connected to a purely resistive load. The following information could be useful: Load Supply Voltage, Supply Frequency Output Frequency Firing Angle At 20Ω 230Vrms , 50 Hz 12.5 1/300 sec Your drawing should contain all the details including Amplitudes, Time, Degrees and Axis Names.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT