Question

1. If a binary signal is sent over a 3-kHz channel whose signal-to-noise ratio is 20...

1. If a binary signal is sent over a 3-kHz channel whose signal-to-noise ratio is 20 dB, what is the

maximum achievable data rate?

Homework Answers

Answer #1

Answer:

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Suppose that the passband of a channel is between 3 MHz and 6 MHz. The signal-to-noise...
Suppose that the passband of a channel is between 3 MHz and 6 MHz. The signal-to-noise ratio of the channel is 39 dB. What is the capacity of the channel? What is the minimum number of signaling levels required to achieve a data rate close to the channel capacity?
A voice signal of bandwidth 4 Khz is transmitted using binary companded PCM with µ=100, and...
A voice signal of bandwidth 4 Khz is transmitted using binary companded PCM with µ=100, and L=256. Calculate the signal-to-noise ratio at the output. Choose one answer. A. 39.49 dB B. 27.80 dB C. 15.75 dB D. 8.24 dB
Given a channel with 4 kHz bandwidth, if we want to send data at 56 kbps,...
Given a channel with 4 kHz bandwidth, if we want to send data at 56 kbps, what is the minimum signal-to-noise ratio of the channel that can support this data rate?
Find the less bandwidth of the channel to transmit the encoded binary signal for the specifications:...
Find the less bandwidth of the channel to transmit the encoded binary signal for the specifications: 4 kHz band-limited signal is sampled at rate of 331⁄3 % higher than the sampling rate and 0.4% allowable error in the sample amplitude (i.e., the maximum quantization error). Assume binary encoding. If 24 signals are multiplexed on a single line (known as a T1 Line in the Telephone system), what is the total data rate for this system.
Suppose a full-scale voice signal with bandwidth 10 kHz is sampled at the Nyquist rate and...
Suppose a full-scale voice signal with bandwidth 10 kHz is sampled at the Nyquist rate and quantized by using a b-bit uniform quantizer. The bit stream is then transmitted using binary PAM over an AWGN channel that is capable of passing frequencies in the range of [0, 200kHz]. 1. Suppose that the signal is transmitted at the maximum bit rate and the two-sided spectral density of noise at the receiver is 10-6 W/Hz. What is the required signal power to...
Q14: For the binary sequence in Q13, sketch the resulting waveforms from sinusoidal modulation if the...
Q14: For the binary sequence in Q13, sketch the resulting waveforms from sinusoidal modulation if the modulation type: ASK, BPSK, FSK, QAM, QPSK, QFSK. Q15: A modulating signal ?(?) bandlimited to 4 kHz is sampled at a rate of 10.000 samples/sec. The samples are quantized into 256 levels, binary coded (unipolar NRZ) and transmitted over a channel with ?? (?) = 6.25*10-5 watt/Hz. Each received pulse has energy 2O 10-5 Given that ?? = 1 and ? 2(?) ̅̅̅̅̅̅̅. a-Find...
A binary message m, where m is equal either to 0 or to 1, is sent...
A binary message m, where m is equal either to 0 or to 1, is sent over an information channel. Because of noise in the channel, the message received is X, where X = m + E, and E is a random variable representing the channel noise. Assume that if X ≤ 0.5 then the receiver concludes that m = 0 and that if X > 0.5 then the receiver concludes that m = 1. Assume that E ∼ N(0,...
QUESTION 1 A transmit signal operating at 100 watts suffers a 3dB signal reduction. What is...
QUESTION 1 A transmit signal operating at 100 watts suffers a 3dB signal reduction. What is the strength of your signal after suffering the 3dB hit? a. 97 watts b. 103 watts c. 50 watts d. 50 dB QUESTION 2 Select the correct statement(s) regarding the Shannon Capacity Formula (C=B*log2(1+SNR)). a. the Shannon Capacity formula identifies the theoretical maximum capacity achievable in any digital communications system b. the Shannon Capacity formula tells you that data rates will increase as signal...
A small satellite with the following characteristics is directly above the ground station. Assume the following:...
A small satellite with the following characteristics is directly above the ground station. Assume the following: Transmitter output power = 1 Watt Altitude = 10,000 km. Carrier frequency = 0.5 GHz Bandwidth = 20 kHz Antenna gain = 1 dB Data rate = 10 kbps The g A small satellite with the following characteristics is directly above the ground station. Assume the following:       Transmitter output power = 1 Watt       Altitude = 10,000 km.       Carrier frequency = 0.5...
1. How many bits per second can be sent over a communications system that has a...
1. How many bits per second can be sent over a communications system that has a baud rate of 4800 with 32 signal levels? 2. (a) (10 points) What is the maximum data rate for a 64-level system with an analog bandwidth of 400 MHz? (b) (10 points) What is the maximum data rate if that same system is subject to noise, with an average power level of 600 and an average noise level of 200? Include units in your...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT