Question

.Calculate the effluent BOD of 2 Stage trickling filter with the following data: Flow rate =...

.Calculate the effluent BOD of 2 Stage trickling filter with the following data: Flow rate = 3.15 m3/min, BOD5 = 290 mg/lt V1 = V2 = 830 m3, Filter depth = 3 m Recirculation of filter1 = 125% of Q Recirculation of filter2 = 100% of Q

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A municipal wastewater having a BOD5 of 225 mg/L is to be treated by a two-stage...
A municipal wastewater having a BOD5 of 225 mg/L is to be treated by a two-stage trickling filter. The desired effluent quality is 30 mg/L of BOD5. If both of the filter depths are to be 1.83 m and the recirculation ratio is 2:1, find the required filter diameters if both the two trickling filers have same removal efficiencies. Use NRC equation and the following design assumptions. Design assumptions: o Influent flow = 10,000 m3 /d o Recirculation ratio =...
A trickling filter plant consists of a primary sedimentation tank, a trickling filter 21 m in...
A trickling filter plant consists of a primary sedimentation tank, a trickling filter 21 m in diameter and 2 m depth, and a secondary sedimentation tank. The primary effluent BOD is 100 mg/L, the plant final effluent is 25 mg/L and the recirculation flow is 0.5 of the wastewater flow entering the plant. The temperature of the water is 15oC. The constants for the random plastic media are n = 0.5 and   k20 = 0.055 min-1. Calculate the hydraulic loading.
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a...
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a community of 45,000 people has a flow of 100 gal/person/day and a BOD5 loading of 0.2 lb/person/day. The upstream characteristics of the receiving waters are: stream flow rate = 20 cfs and BOD5 = 2 mg/L The water quality standards require the in-stream BOD5 to be less than 7 mg/L in this stretch of the river. The minimum BOD removal efficiency that the treatment...
In a gradually varied flow in a rectangular channel for the given data: Q=10 m3/s, b=550...
In a gradually varied flow in a rectangular channel for the given data: Q=10 m3/s, b=550 cm, So=0.15%, n=0.038, y2=2.2 m, ΔL=100 m. Calculate y1 by using the standard step method. Calculate the upstream distance where uniform flow depth takes place by using direct step method.
Question 2 (Excel) A single stage RO desalination system has the following design data: - Water...
Question 2 (Excel) A single stage RO desalination system has the following design data: - Water permeability = 2.05xl0-6 m3/m2.s.kPa - Salt permeability = 2.03x10-5 m3/m2.s - Feed salinity = 44.0 g/L - Feed flow rate = 3.5 kg/s - Permeate flow rate = 120 kg/min - Feed pressure = 7500 kPa - Reject pressure = 63.0 atm - Permeate pressure = 1.1 bar Calculate permeate salinity, brine salinity, brine flow rate, and membrane area. Assume the deviation between the...
A Francis turbine operates with the following data: Head: 100m; Flow rate 36 m3/s; Speed: 410rev/min;...
A Francis turbine operates with the following data: Head: 100m; Flow rate 36 m3/s; Speed: 410rev/min; Outer radius of runner 0.6m; Absolute flow angle: 72◦; Velocity: 36m/s;Exit swirl angle: 0◦ Calculate the effective runner width (i.e. ignoring blockage) and relative flow angle at inlet, the power output and efficiency. Answers: 0.859 m,37.3◦,31.8 MW,90.0%
ANSWER as much as possible: Design an activated sludge process consisting of a complete mix flow...
ANSWER as much as possible: Design an activated sludge process consisting of a complete mix flow through aeration tank followed by final settling tanks. The sizing of the reactor and all appurtenances should be based on a solids retention time, (SRT), of 4 days and the particulates given below. Biological characteristics: Ks = 20 mg/L COD, kd = 0.1 per day, mumax = 3 gVSS/gVSS-day,    Y = 0.4 gVSS/gCOD Primary settling Tank Effluent Characteristics: Q= 20MGD, biodegradable COD, bCOD...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT