Question

Uniform flow in an open channel exists when the flow is steady and the channel is...

  1. Uniform flow in an open channel exists when the flow is steady and the channel is
    1. Prismatic
    2. Non-prismatic and the depth of the flow is constant along the channel
    3. Prismatic and the depth of the flow is constant along the channel
    4. Frictionless

  1. In uniform flow there is a balance between:
    1. Gravity and frictional forces
    2. Gravity and inertial forces
    3. Inertial and frictional forces
    4. Inertial and viscous forces

  1. The water depth in a wide channel is equal to 1.2m (For a vey wide channel R is approximately equal to y). If Chezy coefficient is equal to 49 (metric), then Manning coefficient n (metric) is equal to:
    1. 0.024
    2. 0.021
    3. 0.026

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The maximum Manning’s n for a smooth, clean, unlined, uniform earthen channel is about (based on...
The maximum Manning’s n for a smooth, clean, unlined, uniform earthen channel is about (based on MSMA): 0.012 0.025 0.033 0.002 The Manning’s n for a straight concrete-lined channel with off-form finished is about (average): 0.013 0.016 0.30 0.14 Water flows in a concrete-lined (n=0.013) rectangular channel of 3m wide at a flow depth of 1.2m and a slope of 0.00 Determine the discharge in the channel using Manning’s formula? 10.5 m3/s 11.6 m3/s 8.5 m3/s In a wide rectangular...
- Uniform flow in a channel is characterized by which of the following statements: Total energy...
- Uniform flow in a channel is characterized by which of the following statements: Total energy remains constant along the channel Gradient of total energy is parallel to the channel bed Specific energy decreases along the channel Total energy line either rises or falls depending upon the Fr number - The term alternate depths is used to designate the depths: at the beginning and end of a hydraulic jump having the same kinetic energy for a given discharge having the...
ch 6 1: It is generally a good idea to gain an understanding of the "size"...
ch 6 1: It is generally a good idea to gain an understanding of the "size" of units. Consider the objects and calculate the kinetic energy of each one. A ladybug weighing 37.3 mg flies by your head at 3.83 km/h . ×10 J A 7.15 kg bowling ball slides (not rolls) down an alley at 17.5 km/h . J A car weighing 1260 kg moves at a speed of 49.5 km/h. 5: The graph shows the ?-directed force ??...